GB 25892.7-2010Information technology -- Uyghur, Kazak, Kirgiz coded character set. 32 dot matrix font -- Part 7: Teilik lean (English PDF)

Foreword

All technical content in this section is mandatory.

GB 25892 "IT Uygur, Kazak, Kirgiz coded character set 32 dot matrix font" is divided into the following sections.

--- Part 1. body white body;

--- Part 2. Text in bold;

--- Part 3. Libraries non-white body;

--- Part 4. Non-blackbody library;

--- Part 5. such as grams of white body;

--- Part 6. blackbody as grams;

--- Part 7. Tariq white body;

--- Part 8. Tariq blackbody;

This section is part of the 7 GB 25892.

This section based on GB 21669-2008 "IT Uygur, Kazak, Kirgiz coded character set" under Uygur, Kazak, Kirgiz nominal character, appeared deformed characters and common symbols, with our current standard Uighur, Kazakh Sack paper, Kirghiz text form the basis and in accordance with existing norms Uygur, Kazak, Kirgiz orthographic principles, design and provides information systems Uygur, Kazak, Kirgiz 32 dot matrix Tariq white body font (see Appendix A).

This section of the Appendices A and B are informative annex, Annex C is normative appendix.

This part of the National Information Technology Standardization Technical Committee (SAC/TC28) and focal points.

Introduction

Authorization to use the relevant font data transfer matters, to maintain the standard font data, updating and revision of unity is responsible for the centralized units.

Address. Andingmen East Street, Dongcheng District No. 1 (Beijing 1101 mailbox) Zip Code. 100007 Tel. 6,400,768,984,029,173 Fax. 64007681 E-mail. daihong@cesi.ac.cn IT Uighur, Kazakh, Kirgiz coded character set 32 dot matrix font - Part 7. Tariq white body

1 Scope

The provisions of section GB 25892 GB 21669-2008 in the Uygur, Kazak, Kirgiz 32 character dot matrix column Rick white body font.

This section applies to the Uygur, Kazak, Kirgiz information systems, but also for other related equipment.

2 Normative references

The following documents contain provisions which, through reference in this text, constitute provisions of this part. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this section, however, encourage the parties to this part of the research agreement Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB 21669-2008 IT Uygur, Kazak, Kirgiz coded character set GB 13000 Information technology - Universal Multiple-Octet Coded Character Set (UCS) (GB 13000-2010, ISO/IEC 10646:2003, IDT)

3 Terms and Definitions

The following terms and definitions apply to this section.

Font glyph

One kind of recognizable abstract graphic symbol, it does not depend on any particular design.

Font font

Glyph image set having the same basic design, such as. Tariq white body.

Bitmap fonts dotmatrixfont in a collection of dots to show the graphic character type (shape).

Font width the effective width of the dot graphic characters.

Word order characterorder Graphic character in the set are arranged according to certain rules of order.

4 Graphic character

4.1 The number of characters this section according to GB 21669-2008 provisions provided Uygur, Kazak, Kirgiz 190 graphic characters, in which.

Uygur, Kazak, Kirgiz behalf of 42 characters;

Uygur, Kazak, Kirgiz deformed characters appear 143;

Uygur, Kazak, Kirgiz share numbers, punctuation marks, special symbols 5.

4.2 A character sequence this section provides 190 Uygur, Kazak, Kirgiz nominal character, appeared deformed characters and common symbols font They are arranged in the order specified in GB 13000.

5 Standard data management

In order to strengthen the exchange of information with the product with Uighur, Kazakh, Kirghiz management font and text-based data standards, to ensure that this Part in the implementation of data consistency and correctness to authorize the use of font data transfer matters, to maintain the standard font data, Updating and revision of the responsibility of the unified centralized units.

The method represents bitmap fonts

7 Bitmap fonts

32 Dot matrix font data

C.1 32 dot font data representation this section, the graphic character font data is represented by a dot. Each dot font data is 32 × 32 (dots × vertical transverse Columns points) of 1024 bits, 128 bytes.

Recording format C.2 32 dot font data 32 dot matrix font data of 128 bytes are arranged in the order of 0 to 127 bytes bytes starting end, they are expressed in hexadecimal, per Row four bytes, the recording format is as follows.

Rows

Number of columns

0 1,234,567,242,526,272,829 30 31

00 Byte 3 Byte

31124 bytes to 127 bytes C.3 32 dot matrix font data, for example

0626 FEB6 FEDA FEFC

00000000 00000000 00000000 00000000 00000000 00000000 0,001,000,002,000,000 0,180,000,000,000,000 0,001,000,002,000,000 0,300,000,000,008,000 0,003,000,006,000,000 03600000 0001C000 00C30000 26000000 03C40000 00008000 01030000 26000000 018C0000 00022000 01C30000 66000000 031C0000 00077000 01C30000 66000000 0,038,000,000,022,000 0,083,000,066,000,000 0,030,000,000,000,000 0,303,000,066,000,000 0,060,000,000,000,000 0,003,000,064,000,000 0,040,000,000,008,400 4,003,000,044,000,000 20C00000 00218C00 C0030000 44000000 40E00000 00339C00 E00F0000 4E000000 40F00000 203FFFC0 7FFDC000 7B800000 80780000 403CE7C0 3FF0C000 F1800000 80380000 40100000 00000000 E0000000 8,018,000,080,100,000 00000000 00000000 8,018,000,080,100,000 00000000 00000000 C0300000 80100000 00000000 00000000 C0E00000 80300000 00000000 00000000 73C00000 C0200000 00000000 00000000 7F800000 C0600000 00000000 00000000 1E000000 71C00000 00000000 00000000 00000000 7F800000 00000000 00000000 00000000 1E000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000