GB 2099.6-2008Plugs and socket-outlets for household and similar purposes -- Part 2: Particular requirements for fused plugs (English PDF)

Foreword

All technical content in this section are mandatory.

GB 2099 "plug and socket for household and similar purposes" is divided into the following sections.

Part 1. General requirements Part 2. Particular requirements

--- Particular requirements for fused plugs

--- Particular requirements for appliance socket Particular requirements --- converters Particular requirements --- Fixed without interlock switch socket

--- Fixed Particular requirements for interlocking with a switch socket

--- Safety extra-low voltage plug and socket special requirements this section is Part 2 GB 2099. Particular requirements for fused plugs.

This section identical with IEC 60884-2-1:2006 "plugs and sockets for household and similar purposes - Part 2-1. With special fuse plug Special requirements "(2nd edition).

This section should be GB 2099.1 "plugs and sockets for household and similar purposes - Part 1. General requirements" in conjunction.

This part is proposed by the China Electrical Equipment Industrial Association.

This part of the National Electric annex Standardization Technical Committee (SAC/TC67) centralized.

This section drafted by. China Electric Apparatus Research Institute, Zhejiang Yuehua Telecommunication Co., Ltd., Zhejiang Chint Building Appliance Co., Ltd. Hangzhou Hongyan Electric Co., Ltd., based Electric (Shenzhen) Co., Ltd. Ningbo WARE Electric, Clipsal Industries (Huizhou) Co., Ltd., Granville Science and Technology (Shenzhen) Co., Volex Cable Assembly (Shenzhen) Co., Ltd.

1 Scope

GB 2099.1 of this chapter apply to make the following modifications.

increase.

This section applies to the GB 2099 plug with fuses, fuse here is primarily intended to protect the flexible cable or cord.

These fuses are not used to protect electrical overload or electrical parts.

IEC 60884-2-1:2006 there is a note in here. 1)

1) IEC 60884-2-1:2006 The contents of this note. with plug fuses are not used in the following countries. Denmark.

2 Normative references

The following documents contain provisions which, through reference in this Part of GB 2099 constitute provisions of this section. For dated references, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encourage the agreement on this section Whether the parties can study the latest versions of these documents. For undated reference documents, the latest versions apply to this section.

GB 2099.1 Chapter 2, after the following modifications apply.

increase.

GB 13539.1-2002 Low-voltage fuses - Part 1. General requirements (IEC 60269-1:1998, IDT) GB 13539.3-1999 Low-voltage fuses - Part 3. unskilled personnel Supplementary requirements for fuses (mainly used in home with fuses and similar applications) (idt IEC 60269-3. 1987) modify.

GB/T 5465.2 Graphical symbols for electrical equipment - Part 2. Graphical symbols (GB/T 5465.2-2008, IEC 60417DB.

2007, IDT)

3 Terms and Definitions

GB 2099.1 of this chapter apply to make the following modifications.

increase.

3.101

Equipped with a plug or more replaceable fuse body.

4 General requirements

GB 2099.1 of this chapter apply.

5 Test Overview

GB 2099.1 of this chapter apply.

6 RATINGS

GB 2099.1 of this chapter apply to make the following modifications.

increase.

GB 2099.6-2008/IEC 60884-2-1:2006 6.101 with a fuse plug a minimum current rating should be greater than or equal to the intended follow signs installed fuse rated current.

Category 7

GB 2099.1 of this chapter apply.

8 Flag

GB 2099.1 of this chapter apply to make the following modifications.

8.1 Addition.

Plug with fuse should indicate that this plug built with fuses flag, which can be represented by a symbol.

Rewirable plug with fuse type should be permanently marked maximum rated current can be mounted on the plug fuse. The flag to mark on the plug to be permanently marked on the label.

Non-rewirable plug with fuse type should be permanently marked by the manufacturer and its accompanying declaration soft rope or cord, related electrical phase in line fuse rated current.

Compliance is checked by inspection.

8.2 Addition.

Fuse (GB 5465.2)

9 Check, size

GB 2099.1 of this chapter apply.

10 Protection against electric shock

GB 2099.1 of this chapter apply to make the following modifications.

The following is added.

10.101 unless the plug is completely disconnected from the socket, or can not be with the fuse plug within the body removed or replaced.

Compliance is checked by inspection.

11 Earthing

GB 2099.1 of this chapter apply.

12 Terminals and terminations

GB 2099.1 of this chapter apply.

Fixed socket structure 13 GB 2099.1 This chapter does not apply.

Structure 14 plugs and mobile sockets GB 2099.1 of this chapter apply to make the following modifications.

increase.

14.101 fuse should be replaceable.

It should be inside the plug with a fuse in line with GB 13539.1-2002 GB 13539.3-1999 requirements and appropriate Fuse protection, if applicable.

Fuse should be installed in the ground circuit.

GB 2099.6-2008/IEC 60884-2-1:2006 Plug for use in a non-polar system, the fuse should be installed on all current-carrying pole inside (polar phase and neutral pole).

Plug for use in a polar system, the fuse should only be installed in every phase pole.

Fuse should be installed in the terminal or terminal conductor devices in flexible cable or cord into the intermediate sleeve jacket with a corresponding pin.

The plug should be designed so that after it has been assembled to maintain sufficient contact with the fuse.

Polarity of the plug system with fuses should be designed so that when it is inserted in the wiring device is equipped with a polar socket, it can be neutral to maintain the correct relationship between the phases or between poles and poles with pole.

Compliance is checked by inspection.

15 Interlock socket

GB 2099.1 This chapter does not apply.

16 Anti-aging, and moisture protection provided by the housing

GB 2099.1 of this chapter apply.

17 Insulation resistance and electric strength

GB 2099.1 of this chapter apply.

Work ground contacts 18 GB 2099.1 of this chapter apply.

19 Temperature

GB 2099.1 of this chapter apply to make the following modifications.

Replace the last paragraph.

The temperature rise of the terminals shall not exceed 52K.

20 Breaking capacity

GB 2099.1 of this chapter apply.

21 Normal operation

GB 2099.1 of this chapter apply.

The force required to pull the plug 22 GB 2099.1 of this chapter apply.

23 Soft rope, cord and connector

GB 2099.1 of this chapter apply.

24 Mechanical strength

GB 2099.1 of this chapter apply.

Heat 25

GB 2099.1 of this chapter apply.

GB 2099.6-2008/IEC 60884-2-1:2006

26 Screws, current-carrying parts and connections

GB 2099.1 of this chapter apply.

27 Distance creepage distances and clearances by sealant

GB 2099.1 of this chapter apply.

Abnormal heat-resistant, flame-resistant and electrically insulating material to tracking 28 GB 2099.1 of this chapter apply.

29 Anti-rust properties

GB 2099.1 of this chapter apply.

Additional tests with an insulating sheath 30 of the plug GB 2099.1 of this chapter apply.

GB 2099.6-2008/IEC 60884-2-1:2006