GB 17924-1999General principles of drafting quality requirements standards for geographical indication products (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents".

Drafting.

This document replaces GB/T 17924-2008 "General Requirements for Geographical Indication Products". Compared with GB/T 17924-2008, except for the conclusion...

Aside from structural adjustments and editorial changes, the main technical changes are as follows.

a) The scope of the standard has been changed (see Chapter 1, Chapter 1 of the 2008 edition);

b) The definition of "Geographical Indication Product" has been changed (see 3.1, 2008 edition of 3.1);

c) The fundamental principles have been removed (see Chapter 4 of the 2008 edition);

d) General requirements have been added (see Chapter 4);

e) The file name has been changed (see 5.1, 2008 version 5.1);

f) Added a file structure (see 5.2);

g) The writing of elements has been changed (see Chapter 6, 5.2-5.9 of the 2008 edition).

Please note that some content in this document may involve patents. The issuing organization of this document assumes no responsibility for identifying patents.

This document was proposed by the State Intellectual Property Office.

This document is under the jurisdiction of the National Technical Committee on Standardization of Knowledge Management (SAC/TC554).

1 Scope

This document specifies the general requirements for the compilation of quality standards for geographical indication products, including the document name, structure, and elements.

This document applies to the formulation of quality requirements standards for geographical indication products that have been legally approved and recognized by the State Council's intellectual property administration department.

Revised.

2 Normative references

The contents of the following documents, through normative references within the text, constitute essential provisions of this document. Dated citations are not included.

For references to documents, only the version corresponding to that date applies to this document; for undated references, the latest version (including all amendments) applies.

This document.

GB/T 1.1 Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents GB/T 43583 Classification and Codes of Geographical Indication Products GB/T 44584 Basic Terminology for Geographical Indications

3 Terms and Definitions

The terms and definitions defined in GB/T 44584, as well as the following terms and definitions, apply to this document.

Products originating from a specific region possess qualities, reputations, or other characteristics that are essentially dependent on the natural and human factors of that region.

product.

Note. This includes agricultural and livestock products from this region, as well as raw materials that are wholly or partially sourced from this region and processed in this region according to specific regulations.

Products manufactured and processed by art.

[Source. GB/T 44584-2024, 3.1]

4 General Requirements

4.1 Documents shall be drafted in accordance with the provisions of GB/T 1.1.

4.2 The drafting of the document should highlight the quality characteristics of the geographical indication product, reflecting its authenticity, regionality, distinctiveness, and relevance.

Connection.

4.3 The geographical indication product names, place of origin, quality requirements, etc., mentioned in the document should be consistent with the requirements of the State Council's intellectual property administration department regarding geographical indications.

The protection requirements are consistent with those in the certification announcement for products with the brand mark.

5 File Name and Structure