GB 16487.13-2017Environmental protection control standard for imported solid wastes as raw materials-compressed piece of scrap automobile (English PDF)

Foreword

This Standard is formulated for the implementation of laws and regulations such

as the Law of the People's Republic of China on the Prevention and Control of

Environmental Pollution by Solid Wastes and the Law of the People's Republic

of China on Prevention and Control of Radioactive Pollution, AND for the control

of environmental pollution that is caused by the imported compressed piece of

scrap automobile as raw materials.

This Standard specifies the environmental protection control requirements for

imported compressed piece of scrap automobile.

This Standard, as one of the control standards for environmental protection

series of imported solid wastes, is applicable to the import management of

compressed piece of scrap automobile in the catalog of imported solid wastes

as raw materials.

This Standard was first published in 2005, and this is the first revision.

The main contents of this revision.

-- Add requirements for the external exposure penetrating radiation of

imported compressed piece of scrap automobile;

-- Add control requirements for the non-metallic materials that shall be

removed from the scrap automobile itself in the compressed piece of scrap

automobile;

-- Adjust the control requirements for hazardous wastes;

-- Tighten the control requirements for general carried-waste;

-- Revise the inspection requirements.

From the date of implementation of this Standard, the "Environmental protection

control standard for imported solid wastes as raw materials. Compressed piece

of scrap automobile" (GB 16487.13-2005) shall be abolished.

This Standard is revised by the Department of Soil Environmental Management

and the Department of Science and Technology Standards of the Ministry of

Environmental Protection.

This Standard is mainly drafted by. China Research Academy of Environmental

Sciences.

This Standard was approved by the Ministry of Environmental Protection on

December 29, 2017.

Environmental Protection Control Standard for

Imported Solid Wastes as Raw Materials -

Compressed Piece of Scrap Automobile

1 Scope of application

This Standard specifies the environmental protection control requirements for

imported compressed piece of scrap automobile and the control requirements

for the dismantling and suppression of scrap automobile before the compressed

piece is formed.

This Standard applies to the import management of the following compressed

piece of scrap automobile.

HS Code Solid waste name

7204490010 Compressed piece of scrap automobile

2 Normative references

This Standard refers to the terms of the following documents. For undated

references, the valid edition applies to this Standard.

GB 5085.1, Identification standards for hazardous wastes. Identification for

corrosivity

GB 5085.2, Identification standards for hazardous wastes. Screening test for

acute toxicity

GB 5085.3, Identification standards for hazardous wastes. Identification for

extraction toxicity

GB 5085.4, Identification standards for hazardous wastes. Identification for

ignitability

GB 5085.5, Identification standards for hazardous wastes. Identification for

reactivity

GB 5085.6, Identification standards for hazardous wastes. Identification for

toxic substance content

SN/T 0570, Rules for the inspection of the radioactive contamination of waste

metals for import

SN/T 1791.11, Rules for the inspection and quarantine of waste imported as

raw material. Part 11.Compressed piece of scrap automobile

Directory of National Hazardous Wastes (Order of the Ministry of

Environmental Protection, National Development and Reform Commission

and Ministry of Public Security No. 39)

3 Terms and definitions

The following terms and definitions are applicable to this Standard.

4 Control standards and requirements