Valid

GB 15967-1995Specifications for digital aerial photogrammetric mapping of 1��500 1��1 000 1��2 000 topographic maps (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for GB 15967-1995 in 30 minutes.

Issued by

State Administration for Market Regulation, China National Standardization Administration

Level / Type

National · Mandatory

Issue date

May 28, 2024

Implementation date

September 1, 2024

Scope

GB 15967-1995 (Specifications for digital aerial photogrammetric mapping of 1��500 1��1 000 1��2 000 topographic maps) is available as an English-translated PDF.

GB 15967-1995 — This document specifies the production of 1:500, 1:1000, 1:2000 digital surface models based on frame-type digital aerial photography data: Preparation, technical requirements, and relevant Responsible for document production, quality control, results compilation and submission, etc: This document is applicable to 1:500, 1:1000, 1:2000 DSM, DEM, DOM and DLG production operations: Cartographic production based on push-broom aerial photography is performed as a reference:

Found what you need?

Document preview — GB 15967-1995

National Standard of the People's Republic of China

ICS: 07.040
Classification: A 77

Issued by: State Administration for Market Regulation, China National Standardization Administration

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 Abbreviations
5 General requirements
5.1 Results Requirements
5.2 Requirements for aerial photographic data
5.3 Requirements for aerial triangulation results
5.4 Instrument and equipment requirements
6 Preparation
6.1 Data Collection
6.2 Data Analysis
6.3 Technical Design
7 Restore the diorama
8 DSM production
8.1 DSM production method
8.2 Feature Data Collection
8.3 DSM Generation
8.4 DSM Edit
8.5 Inlay edge
8.6 Image cropping
9 DEM production
9.1 DEM production method
9.2 Feature Data Collection
9.3 DEM generation
9.4 DEM Editing
9.5 Inlay edge
9.6 Image cropping
10 DOM production
10.1 DOM production method
10.2 Digital Differential Correction
10.3 Image Processing and Color Stabilization
10.4 Mosaic
10.5 Image cropping
10.6 Finishing
11 DLG Production
11.1 DLG production method
11.2 Representation and selection of elements
11.3 Stereo Mapping
11.4 Adjustment
11.5 Field survey
11.6 Data Editing
12 Preparation of relevant documents
13 Quality Control
13.1 Basic requirements
13.2 Process Quality Control
13.3 Quality Inspection and Acceptance of Results
14 Results collation and submission

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting:

This document replaces GB/T 15967-2008 "1:5001:10001:2000 topographic map aerial photogrammetry digital mapping specification" Compared with GB/T 15967-2008, in addition to structural adjustments and editorial changes, the main technical changes are as follows:

a) Changed the mapping operation from "analytical aerial photogrammetry method" to "digital aerial photogrammetry method" the content and scope of application of the standard have been changed accordingly (see Chapter 1);

b) Added digital surface model (DSM), digital elevation model (DEM), digital orthophoto (DOM), digital line map (DLG) etc: (see Chapter 4);

c) The description of the specifications and requirements for the results has been changed (see 5.1, 3:1 of the:2008 edition);

d) The accuracy of digital mapping of 1:500, 1:1000 and 1:2000 topographic maps using analytical aerial photogrammetry has been deleted:

Requirements, online data collection requirements, etc: (see 3.2, 3:3 and Chapter 6 of the:2008 edition);

e) Added the frame-based digital aerial photogrammetry method for 1:500, 1:1000, 1:2000 DSM, DEM, Operation contents and technical requirements of DOM and DLG production (see Chapters 8, 9, 10 and 11);

f) Added requirements for the production of metadata, calendar books, technical summaries, etc: (see Chapter 12);

g) The relevant contents of quality control have been modified (see Chapter 13, 8:1 of the:2008 edition);

h) The content related to the compilation and submission of results has been modified (see Chapter 14, 8:2 of the:2008 edition):

1 Scope

This document specifies the production of 1:500, 1:1000, 1:2000 digital surface models based on frame-type digital aerial photography data:

Preparation, technical requirements, and relevant Responsible for document production, quality control, results compilation and submission, etc:

This document is applicable to 1:500, 1:1000, 1:2000 DSM, DEM, DOM and DLG production operations: Cartographic production based on push-broom aerial photography is performed as a reference:

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document:

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document:

GB/T 7931 1:5001:10001:2000 Field specification for aerial photogrammetry of topographic maps GB/T 13923 Classification and codes of basic geographic information elements GB/T 18316 Quality inspection and acceptance of digital surveying and mapping results GB/T 20257.1 National basic scale map diagram Part 1: 1:500 1:1000 1:2000 topographic map diagram GB/T 20258.1 Basic geographic information element data dictionary Part 1: 1:5001:10001:2000 scale GB/T 23236 Specification for aerial triangulation of digital aerial photogrammetry GB/T 24356 Quality inspection and acceptance of surveying and mapping results GB/T 27919 Technical Specification for IMU/GPS Assisted Aerial Photography GB/T 27920.1 Specification for digital aerial photography Part 1: Frame-type digital aerial photography GB/T 39608 Metadata of basic geographic information digital products CH/T 1001 Rules for the preparation of surveying and mapping technical summaries CH/T 1004 Specification for Surveying and Mapping Technical Design CH/T 9008.1 Basic geographic information digital results 1:5001:10001:2000 digital line map CH/T 9008.2 Basic geographic information digital results 1:5001:10001:2000 digital elevation model CH/T 9008.3 Basic geographic information digital results 1:5001:10001:2000 digital orthophoto map CH/T 9022 Basic geographic information digital products 1:5001:10001:20001:50001:10000 digital surface Model

3 Terms and definitions

There are no terms or definitions that require definition in this document:

4 Abbreviations

The following abbreviations apply to this document:

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

How to Download GB 15967-1995

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.