GB 15579.7-2013Arc welding equipment - Part 7: Torches (English PDF)

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

This document is Part 7 of GB/T 15579 "Arc Welding Equipment". GB/T 15579 has released the following parts.

---Part 1: Welding power source;

---Part 2: Liquid cooling systems;

---Part 3: Arc starting and arc stabilizing devices;

---Part 4: Periodic inspection and testing;

---Part 5: Wire feeding device;

---Part 6: Load limiting equipment;

---Part 7: Welding torch (gun);

---Part 8: Gas circuit devices for welding and plasma cutting systems;

---Part 9: Installation and use;

---Part 10: Electromagnetic compatibility (EMC) requirements;

---Part 11: Welding clamps;

---Part 12: Welding cable coupling device;

---Part 13: Welding clamps;

---Part 14: Calibration, validation and consistency testing.

This document replaces GB/T 15579.7-2013 "Arc welding equipment Part 7: Welding torch (gun)" and is consistent with GB/T 15579.7-2013 in addition to structural adjustments and editorial changes, the main technical changes are as follows.

a) Increase and refinement of "scope" (see Chapter 1);

b) Two items are added and one item is deleted in "Terms and Definitions" (see Chapter 3, Chapter 3 of the 2013 edition);

c) One item is deleted for the ambient air temperature range and one item is added for the relative air humidity (see Chapter 4, Chapter 4 of the 2013 edition);

d) The test environment temperature and electrical measuring instrument accuracy requirements have been changed (see 6.1, 2013 version of 6.1);

e) Add voltage rating requirements for mechanically guided submerged arc welding torches (guns) and torch (gun) coupling devices (see 7.1);

f) Delete the requirements related to the welding torch (gun) arc ignition and arc stabilizing voltage (see 7.3 of the 2013 edition);

g) Added additional requirements for plasma cutting torches (see 7.3.2);

h) Added requirements for arc starting and arc stabilizing voltage (see 7.5);

i) Added requirements for mechanically guided welding torches (guns) and smoke exhaust welding torches (guns) (see 8.1);

j) Added submerged arc welding torch (gun) (see 8.3.5);

k) Added the inapplicable scope of "resistance to welding spatter" (see Chapter 10);

l) Add requirements for handle materials in "Mechanical Protection" (see 11.3);

m) Add requirements for smoke exhaust welding torches (guns) in the "Instructions for Use" (see Chapter 13).

This document is equivalent to IEC 60974-7:2019 "Arc Welding Equipment Part 7: Welding Torch (Gun)".

Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents.

Introduction

Arc welding equipment mainly includes power supplies powered by power grids or batteries, as well as mechanical devices driven by arc welding and similar processes (such as arc welding Power supply and plasma cutting system, etc.), auxiliary equipment, welding accessories, etc.

GB/T 15579 "Arc Welding Equipment" stipulates the safety requirements, performance requirements and electromagnetic compatibility requirements of arc welding equipment, and consists of 14 parts composition.

---Part 1: Welding power source. The purpose is to specify the safety requirements and performance requirements of welding power sources.

---Part 2: Liquid cooling systems. The purpose is to specify the safety requirements and structure of the liquid cooling system of the auxiliary equipment welding torch (gun).

structural requirements.

---Part 3: Arc starting and arc stabilizing devices. The purpose is to specify the safety requirements for arc starting and arc stabilizing devices of auxiliary equipment.

---Part 4: Periodic inspection and testing. The purpose is to specify the periodic inspection and test procedures for welding power sources and to ensure that after maintenance electrical safety requirements.

---Part 5: Wire feeding device. The purpose is to specify the safety requirements and performance requirements for wire feed devices of welding accessories.

---Part 6: Limiting load equipment. Intended for connection to single-phase public low-voltage supply systems and designed for non-professionals Safety requirements and performance requirements for load-limited arc welding and cutting power sources and auxiliary devices used.

---Part 7: Welding torch (gun). The purpose is to specify the safety requirements and structural requirements for welding accessories welding torches (guns).

---Part 8: Gas circuit devices for welding and plasma cutting systems. The purpose is to provide for auxiliary equipment flammable gas or oxygen Safety requirements and performance requirements for gas circuit devices.

---Part 9: Installation and use. The purpose is to specify the requirements for the installation and use of arc welding equipment.

---Part 10: Electromagnetic compatibility (EMC) requirements. The purpose is to specify the electromagnetic compatibility requirements for arc welding power sources and auxiliary equipment.

---Part 11: Welding pliers. The purpose is to specify the safety requirements and performance requirements for welding accessories and welding clamps.

---Part 12: Welding cable coupling devices. The purpose is to specify the safety requirements and performance of welding accessories and welding cable coupling devices Require.

---Part 13: Welding clamps. The purpose is to specify the safety requirements and performance requirements for welding accessories and welding clamps.

---Part 14: Calibration, validation and consistency testing. The purpose is to specify the validation requirements for arc welding and its external monitoring equipment and arc Requirements such as actual verification operation of welding equipment.

Arc welding equipment part 7.welding torch (gun)

1 Scope

This document specifies the safety requirements and structural requirements for welding torches (guns) used in arc welding and similar processes. This document is suitable for manual and mechanical Guided, air-cooled, liquid-cooled, electric, wire-spooled and fume-exhaust torches (guns).

In this document, the welding torch (gun) consists of the main body of the welding torch (gun), cable hose assembly and other components.

This document also applies to cable hose assemblies connected between the power source and auxiliary equipment.

This document does not apply to welding clamps used for manual arc welding and cutting torches used for air arc gouging/cutting.

Note 1.Typical similar processes include arc cutting and spraying.

Note 2.For other components, see Table A.1 in Appendix A.

Note 3.In this document, the requirements for welding torches and welding guns are the same. For the sake of convenience, they are all referred to as welding torches (guns) below.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations for undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document.

ISO 21904-3:2018 Requirements, testing and marking of air filtration equipment for health and safety in welding and related processes Part 3 Note. GB/T 4208-2017 Enclosure protection level (IP code) (IEC 60529:2013, IDT) IEC 60695-11-10 Fire hazard test Part 11-10.Test flame 50W Horizontal and vertical flame test method Note. GB/T 5169.16-2017 Fire hazard test for electrical and electronic products Part 16: Test flame 50W Horizontal and vertical flame test methods (IEC 60695-11-10:2013,IDT) power sources)

Note 1.There is no technical difference between the quoted content of IEC 60974-1:2021 and the quoted content of IEC 60974-1:2017/AMD1.2019

Note 2.GB/T 15579.1-2013 Arc welding equipment Part 1: Welding power source (IEC 60974-1:2005, IDT)

3 Terms and definitions

The terms and definitions defined in IEC 60974-1:2021 and the following apply to this document.

ISO and IEC publish terminology databases for standardization at.

Note. See Appendix A for other related terms.