GA/T 2130-2024Code of practice for suspect motor vehicle investigation (English PDF)

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting.

1 Scope

This document stipulates the circumstances of suspected motor vehicles, the items and methods of inspection of suspected motor vehicles, the conditions for confirming suspected motor vehicles, and the Investigation procedures and requirements.

This document is applicable to the investigation of suspected motor vehicles by the traffic management department of the public security organs when handling motor vehicle business.

The security agency confirms the uniqueness of the vehicle.

2 Normative references

The contents of the following documents constitute essential clauses of this document through normative references in this document.

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document.

GB 7258 Technical conditions for motor vehicle operation safety GB 16735 Vehicle Identification Number (VIN) for Road Vehicles

3 Terms and definitions

There are no terms or definitions that require definition in this document.

4 Suspected Motor Vehicle Situation

4.1 If the uniqueness of a vehicle is suspected of the following, an investigation of the suspected motor vehicle should be conducted.

a) The parts on which the vehicle identification number is engraved have traces of grinding, patching, gasketing, chiseling, repainting, rusting, unevenness, or engraving.

There are signs of partial or complete replacement of the vehicle body component where the vehicle identification number is engraved;

b) The engraved vehicle identification number is different from the vehicle identification number imprint or electronic data of the vehicle identification number kept in the motor vehicle file.

The information, character font, size, spacing characteristics, engraving process and background characteristics of the engraving area are obviously inconsistent;

c) Vehicle identification number and the vehicle factory certificate, import certificate, driving license, registration certificate or motor vehicle file record inconsistent;

d) The content, composition and engraving characteristics of the vehicle identification code do not comply with the requirements of GB 7258, GB 16735 and other technical standards;

e) The vehicle identification number marked on the same vehicle is inconsistent;

f) The vehicle identification code engraved shall be the same as the manufacturer, brand and model, and the Announcement of Road Motor Vehicle Manufacturers and Products (hereinafter referred to as the "Announcement").

The vehicle identification code engraving position, characteristics, and content composition of the batches of vehicles (called "Announcement") are obviously different;

g) Passenger cars and trucks with a total mass of less than or equal to 3,500 kg (except low-speed vehicles) manufactured from March 1, 2013 that do not meet the it is required to place the vehicle identification code mark near the windshield pillar, or the location and method of setting the vehicle identification code mark are not appropriate.

Comply with the technical standards of GB 7258, GB 16735, etc., or be the same manufacturer, brand, model, or batch model as specified in the Announcement There are obvious differences in features, or signs of damage, re-marking, etc.;

h) Engine (drive motor) number [including engine (drive motor) model and factory number] and motor vehicle factory certificate the import certificate, driving license, registration certificate or motor vehicle file records are inconsistent;