GA 886-2018Individual police equipment - Expandable baton (English PDF)

Foreword

The full technical content of this standard is mandatory.

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces GA 886-2010 "Public Security Single Police Equipment Police Telescopic Batons", mainly modified compared with GA 886-2010 as follows.

--- Increased product classification (see 4.1);

--- Modified the number (see 4.2, Chapter 3 of the 2010 edition);

--- Revised the structural requirements (see 5.3, 4.5 of the 2010 edition);

---Modified color requirements (see 5.5, 4.3 of 2010 edition);

--- Modified the marking requirements (see 5.6, 4.6 of the 2010 edition);

--- Revised the quality requirements (see 5.7, 4.4 of the 2010 edition);

--- Revised material requirements (see 5.8, 4.7 of 2010 edition);

---Modified performance requirements (see 5.9, 4.8 of the 2010 edition);

--- Modified the test method (see Chapter 6, Chapter 5 of the 2010 edition).

This standard was proposed by the Equipment Finance Bureau of the Ministry of Public Security.

This standard is under the jurisdiction of the National Police Equipment Standardization Technical Committee (SAC/TC561).

This standard was drafted. Ministry of Public Security Equipment Finance Bureau, National Police Equipment Standardization Technical Committee, Ministry of Public Security First Institute, Ministry of Public Security Special Police Equipment Quality Supervision and Inspection Center, Beijing Anbo Meilian Police Equipment Co., Ltd., Shanghai Lianbo Security Equipment Co., Ltd.

Guangzhou Jingshi Safety Technology Protection Product Development Co., Ltd., Wenzhou Jinniu Police Safety Equipment Co., Ltd., Guangzhou Weifu Technology Development Co., Ltd.

the company.

1 Scope

This standard stipulates the terms and definitions, classification and numbering, technical requirements, test methods, inspection rules, and regulations of public security single police equipment telescopic batons.

Packaging, labeling, transportation and storage.

This standard applies to the production, inspection and acceptance of public security single police equipment telescopic baton products.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only the dated version applies to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 2423.37-2006 Environmental testing for electric and electronic products - Part 2. Test methods Test L. Dust test GB/T 2828.1-2012.Sampling procedures for counting sampling - Part 1. Quantitative inspection by batches plan GB/T 3077-2015 alloy structural steel Aluminium and aluminium alloys - Hot extruded tubes - Part 1 GB/T 6543-2008 Single corrugated carton and double corrugated carton for transport packaging GA 244 People's Police Police Emblem Technical Standard QB/T 3832-1999 Evaluation of corrosion test results of metal coatings for light industrial products

3 Terms and definitions

The following terms and definitions apply to this document.

Public security single police equipment telescopic baton expandablebatonofindividualpoliceequipment According to the drawings, standard samples and production approved by the competent department of the Ministry of Public Security, it is used for the public security police's daily duty enforcement.

Batons with a structure and length that can be stretched.

4 Classification and numbering