Valid

GA 1258-2015Requirements for number and packing-mark of civilian firearms (English PDF)

Preview PDF

Also coversGA1258-2015

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for GA 1258-2015 in 30 minutes.

Issued by

Ministry of Public Security of PRC

Level / Type

National · Mandatory

Issue date

April 30, 2015

Implementation date

June 1, 2015

Scope

GA 1258-2015 (Requirements for number and packing-mark of civilian firearms) is available as an English-translated PDF.

GA 1258-2015 — This standard specifies the rules for numbering of firearms for civilian use, requirements for number marking, packaging mark requirements, requirements for numbering and packaging mark of civilian firearms for export, requirements for information collection and reporting and management requirements for civilian firearms.

This standard applies to the numbering, packaging mark, management of firearms for civilian use, which is stipulated in the "Law of the People's Republic of China on the Administration of Firearms".

Found what you need?

Document preview — GA 1258-2015

National Standard of the People's Republic of China

ICS
13.310
Classification
A 91

Issued by: Ministry of Public Security of PRC

Contents

  • Foreword...3
  • 1 Scope...4
  • 2 Normative references...4
  • 3 Terms and definitions...4
  • 4 Rules for numbering firearms for civilian use...5
  • 5 Requirements for marking numbers of firearms for civilian use...6
  • 6 Requirements for packaging mark of firearms for civilian use...7
  • 7 Requirements for numbering mark of export firearms for civilian use...9

Foreword

All technical contents of this standard are mandatory.

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

Please note that some contents of this document may refer to patents. The issuing

agency of this document assumes no responsibility for identifying these patents.

This standard was proposed by the Public Security Bureau of the Ministry of Public

Security.

This standard shall be under the jurisdiction of the National Security Alarm System

Standardization Technical Committee (SAC/TC 100).

Drafting organizations of this standard: Public Security Administration Bureau of the

Ministry of Public Security, Public Security Management Corps of Beijing Municipal

Public Security Bureau, Military Products Department of China Ordnance Equipment

Group Corporation, No.208 Research Institute of China Ordnance Industry, Beijing

Innovation Jingan Danling Technology Co., Ltd.

1 Scope

This standard specifies the rules for numbering of firearms for civilian use,

requirements for number marking, packaging mark requirements, requirements for

numbering and packaging mark of civilian firearms for export, requirements for

information collection and reporting and management requirements for civilian

firearms.

This standard applies to the numbering, packaging mark, management of firearms for

civilian use, which is stipulated in the "Law of the People's Republic of China on the

Administration of Firearms".

2 Normative references

The following documents are essential to the application of this document. For the dated

documents, only the versions with the dates indicated are applicable to this document;

for the undated documents, only the latest version (including all the amendments) is

applicable to this standard.

GB/T 14691-1993 Technical drawings - Lettering

GB/T 18347 Code 128

Country (region) statistical code table

3 Terms and definitions

The following terms and definitions apply to this document.

3.1

Civilian firearms

All kinds of air guns, shotguns, anesthesia injection guns, sporting guns that are

manufactured, distributed, configured, used in accordance with the "Law of the

People's Republic of China on the Administration of Firearms".

3.2

Main components of firearms

The main components, such as the barrel, bolt, receiver.

3.3

Gun number

On the main parts and components of the gun, a group of Arabic numerals or a

combination of Arabic numerals and English letters, which are used to represent the

unique number of the specific information of the gun, according to certain rules.

3.4

Marking

Use of technical means to mark the gun number on the surface of the main

components of the gun.

4 Rules for numbering firearms for civilian use

4.1 Requirements for using symbols

The gun number shall consist of Arabic numerals or Arabic numerals and English letters.

4.2 Compilation rules

The gun number consists of 16 Arabic numerals or Arabic numerals and English letters.

Among them, the enterprise code is the enterprise code stipulated by the Ministry of

Public Security, which is represented by 2 digits of Arabic numerals; the year of

manufacture is the last two digits of the year of manufacture; the type code of the

firearm is represented by 4 digits of Arabic numerals, the specific code classification is

shown in Table 1; the model code is different models of the same type of firearm, which

is determined by the manufacturer itself, represented by 2 digits of Arabic numerals or

Arabic numerals and English letters and reported to the management department for

record; the serial number is represented by 6 digits of Arabic numerals, which shall be

000001 ~ 999999. The specific arrangement is as follows:

firearms for civilian use

8.1 Requirements for the collection and submission of domestic firearms

manufactured, distributed, configured, used for civilian purposes

8.1.1 Information collection and submission requirements for manufacturers

Domestic enterprises, that manufacture firearms for civilian use, shall mark the number

of firearms for civilian use, in accordance with the requirements of Chapter 4 and

Chapter 5. When the finished product is warehousing-in, use the firearms management

information system to collect relevant information, such as the serial number and

production time of the finished civilian firearm. When the product is warehousing-out

for sale, use the firearms management information system to collect such information,

as the civilian firearm number, sales flow, etc.; report to public security organ.

8.1.2 Requirements for information collection and submission of distributors

Domestic enterprises, that distribute firearms for civilian use, shall use the firearms

management information system, to collect relevant information, such as serial

numbers and storage time of firearms, which are purchased for civilian use at the time

of purchase and storage. When warehousing-out for sale, use the firearms management

information system to collect relevant information, such as serial number and sales flow

of civilian firearms leaving the warehouse; report them to the public security organs.

8.1.3 Requirements for information collection and reporting of user organization

Domestic organizations, that use firearms for civilian use, shall use the firearms

management information system, to collect relevant information, such as the number of

firearms for civilian use and storage time, when purchasing and putting them into

storage. When collecting firearms, use the firearms management information system,

to collect relevant information, such as firearm number, collector, collection and return

time; report to the public security organ.

8.2 Information submission requirements for imported firearms for civilian use

Enterprises importing firearms for civilian use shall use the firearms management

information system, to collect relevant information such as import contracts, names of

imported firearms, models (with photos), quantity, firearm number, country of

manufacture, customs declaration port, etc.; submit them to the public security organs.

The user organization shall use the firearms management information system, to collect

relevant information such as the name, model, quantity, number of imported firearms

for civilian use; submit them to the public security organs.

8.3 Requirements for reporting information on exported firearms for civilian use

......

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 14691-1993 · GB/T 18347

How to Download GA 1258-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

GA 1258-2015

$145.00