Valid

FZ/T 95017-2012Computer to screen engraver for textile printing (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for FZ/T 95017-2012 in 30 minutes.

Issued by

Ministry of Industry and Information Technology of the People's Republic of China

Level / Type

National · Recommended

Issue date

December 28, 2012

Implementation date

June 1, 2013

Scope

FZ/T 95017-2012 (Computer to screen engraver for textile printing) is available as an English-translated PDF.

FZ/T 95017-2012 - This standard specifies the printing computer directly terms and definitions, product classifications and basic parameters of the system network machine, requirements, test methods, inspection regulations Then, signs, packaging, transport and storage.

This standard applies to the use of an ink jet, spray wax, optical photographic and laser ablation imaging modality printing computer-to-screen making machine, including rotary screen printing Flower Computer-system network machine (called a cylinder type lower) Peace Network printing Computer-system network unit (hereinafter referred to as flat screen type).

Found what you need?

Document preview — FZ/T 95017-2012

National Standard of the People's Republic of China

ICS
58.120.50

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

The standard proposed by China Textile Industry Association.

This standard by the national machinery annex Standardization Technical Committee spinning, dyeing and finishing Technical Committee Textile and (SAC/TC215SC) Centralized.

This standard by Hangzhou Dongcheng Image Technology Co., Ltd., Hangzhou Open Source Computer Technology Co., Ltd. Shaoxing Textile Science and Technology Center, Hangzhou Honghua Digital Technology Co., Ltd., Zhejiang Technical Supervision and Inspection Institute of Quality, China Textile Machinery Association is responsible for drafting.

Drafters of this standard. Chai Zhonghua, Xu Haiping, Zhou Fengjiang, Ms. Li, Chen Shunlin, Zhenglie Feng, single Riverside, Yan Qi Mei, Xu Quanwei.

Printing Computer-System Machine

1 Scope

This standard specifies the printing computer directly terms and definitions, product classifications and basic parameters of the system network machine, requirements, test methods, inspection regulations Then, signs, packaging, transport and storage.

This standard applies to the use of an ink jet, spray wax, optical photographic and laser ablation imaging modality printing computer-to-screen making machine, including rotary screen printing Flower Computer-system network machine (called a cylinder type lower) Peace Network printing Computer-system network unit (hereinafter referred to as flat screen type).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs GB 755 rotary motor fixed and performance GB 5226.1-2008 Electrical safety of machinery and electrical equipment - Part 1. General requirements GB/T 7111.1 Textile machinery - Noise test code - Part 1. General requirements GB/T 7111.7 Textile machinery - Noise test code - Part 7. Dyeing & Finishing Machinery GB/T 19244 IT High Performance Serial Bus GB/T 21893-2008 Textiles flat screen printing plate-making photosensitive emulsion GB/T 21894-2008 textile rotary screen printing plate-making photosensitive emulsion SJ20706-1998 PCI local general line specification FZ/T 90001 Textile machinery Packaging FZ/T 90074 textile machinery products Painting FZ/T 90089.1 textile machinery nameplate types, sizes and technical requirements FZ/T 90089.2 textile machinery nameplate content

3 Terms and Definitions

The following terms and definitions apply to this document.

Printing Computer-system network computertoscreenoftextileprinting Directly recorded to the system network mode printing film version on the computer and related devices graphic information.

Using printing Computer-made equipment graphic information network recorded on the printing film version.

Imaging movement the bitmap information according to design requirements are arranged into a two-dimensional movement of the film version on. Wherein the direction of movement of the imaging head for the X direction; and imaging head movement Direction perpendicular to the Y direction. Imaging movement, also known as scanning motion.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

Referenced standards

How to Download FZ/T 95017-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

FZ/T 95017-2012

$165.00