FZ/T 94007.2-2013Twin wire healds. Part 2: Twin wire healds for weaving machines with heald frames (English PDF)

Foreword

FZ/T 94007 "Comprehensive" is divided into the following three parts.

--- Part 1. Jacquard woven fully mechanized eye with inserts of steel wire;

--- Part 2. Fully loom heddle wire;

--- Part 3. mechanized loom heald frames with steel.

This section FZ/T Part of 294,007.

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This section instead of FZ/T 94007-1992 "mechanized loom wire" in the part, not to replace the contents of Jacquard wire Fully, this part will be included FZ/T Part of 194,007. This part FZ/T 94007-1992 loom heald frame in the wire Fully as the main content, compared with FZ/T 94007-1992, the major technical changes in addition to editorial changes outside as follows.

--- To increase the mechanized eye shape classification Fully coated material (see 3.1.2,3.1.3);

--- Remove Figure 1, Table 1 and Figure 2, Table 2 (see 1992 edition of 3.2.2 and 3.3.3);

--- Remove the labeling of products (see 1992 edition 3.4);

--- Modify the inspection rules (see Chapter 6, Section 6 of the 1992 edition);

--- Modified "logo, packaging, transportation, storage" (see Chapter 7, 1992 edition, Chapter 7).

This part is proposed by the China Textile Industry Association.

This part of the National Textile machinery and accessories Textile Equipment Standardization Technical Committee Technical Committee (SAC/TC215/SC2) Centralized.

This section drafted by. consciousness Zhejiang Industrial Co., Ltd., Shaanxi Institute of textile equipment.

Introduction

Revise international standards ISO 364. 1983 developed by GB/T 24380-2009 "Textile machinery and accessories loom heddle wire Fully "includes only the mechanized loom heddle wire scope, size, label, although you can play for the elimination of international trade limited technical barriers Positive role; however, it is not only difficult technical elements missing to meet the requirements of the consumer under the market economy system, and no maneuverability. FZ/T 94007-1992 "mechanized loom wire" Although covering all types of steel mechanized looms use and lists its dimensions, but has been unable to fill Foot weaving technology development requirements, and standard error should be corrected; therefore, this partially completed on the basis of FZ/T 94007-1992 on Improved the GB/T 24380-2009 technical elements missing part. In actual use of this section, shall GB/T 24380-2009 closely with Sets and use.

Fully Part 2. Fully loom heddle wire

1 Scope

FZ/T 94007 provisions of this part of the mechanized loom heddle wire (hereinafter referred to as "fully mechanized box") classification and marking requirements, test side Method, inspection rules and packaging, labeling, storage.

This section applies to heddle ensemble.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan (ISO 2859-1:1999, IDT) GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test) GB/T 4340.1 metallic materials - Vickers hardness test - Part 1. Test methods GB/T 4956 on a non-magnetic substrate magnetic coatings Measurement of coating thickness - Magnetic method GB/T 24380-2009 Textile machinery and accessories mechanized loom heddle wire

3 Classification and Marking

4 Requirements

The basic dimensions of 4.1 heddle mechanized and limit deviations shall be the following requirements.

a) Size comply with GB/T 24380-2009 defined in Chapter 2;

b) basic size limit deviation in line with Table 1.