FZ/T 90060.5-2005Textile machinery. Product drawing and design document. Part 5: Format (English PDF)

Foreword

FZ/T 90060 includes the following nine parts under the general title of "Textile Machinery Product Drawings and Design Documents".

--- Part 1. General;

--- Part 2. Numbering;

--- Part 3. Requirements for drawings;

--- Part 4. Requirements for design documents;

--- Part 5. Format;

--- Part 6. Integrity;

--- Part 7. Change;

--- Part 8. Standardization review;

--- Part 9. Management.

This part is the fifth part of FZ/T 90060.

This part is based on the needs of enterprises to implement computer-aided design (CAD) and enterprise quality management system and product market competition.

According to relevant national standards and industry standards, the characteristics of the textile machinery industry have been fully considered. In the original FZ/T 90063-1995 "Textile machinery design on the basis of the requirements, format and method of the document and FZ/T 90064-1995 "Format and method of textile machinery product drawings" Revised.

This part replaces FZ/T 90064-1995 "Format and Filling of Textile Machinery Product Drawings", and at the same time partially replaces FZ/T 90063-1995 "Requirements, Formats and Replacement of Textile Machinery Design Documents". The main differences from the original standard are as follows.

---The standard name is changed from "requirements, format and method of product drawings and design documents" to "Textile machinery product drawings and designs" document Part 5. Format";

--- The title bar of the drawing and the signature column of the design file have been added to the "Approval" column;

---Electrical drawings, detailed list, summary table and mechanical products have been unified;

--- In order to facilitate computer input, the corner note in the original standard was cancelled;

--- Mix the chart with the text for easy access.

Appendix A, Appendix B, Appendix C, Appendix D, and Appendix E of this part are informative annexes.

This part was proposed by the China Textile Industry Association.

This part is under the jurisdiction of the National Textile Machinery and Accessories Standardization Technical Committee.

This section is mainly drafted by. China Textile Machinery Research Institute, Zhengzhou Textile Machinery Co., Ltd., Shaoyang Textile Machinery Co., Ltd., Jingwei Textile Machinery Co., Ltd., China Textile Machinery (Group) Co., Ltd., Best Machinery Manufacturing Co., Ltd.

1 Scope

This part of FZ/T 90060 specifies the textile machinery product drawings and design documents, including CAD drawings and design documents (hereinafter referred to as CAD file) format and fill in the rules.

This section applies to the format of product drawings and design documents for the textile machinery industry. Other product drawings and design file formats can also be referred to carried out.

2 Normative references

The provisions in the following documents become the provisions of this part by reference to this part of FZ/T 90060. Quotations with dated , all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section the parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this section.

GB/T 1.1 Standardization Work Guidelines Part 1. Standard Structure and Writing Rules GB/T 4457.4 mechanical drawing pattern drawing line GB/T 14691 technical drawing font GB/T 17825.2 CAD file management basic format

3 Product pattern format and filling method