FZ/T 64094-2022Regenerated pallets made from wasted textile (English PDF)
This is a limited preview
Buy now to download the full PDF (6 pages)
Need quotation for your management?
Get a formal quotation for FZ/T 64094-2022 in 30 minutes.
Issued by
Ministry of Industry and Information Technology of the People's Republic of China
Level / Type
National · Recommended
Issue date
April 8, 2022
Implementation date
October 1, 2022
Scope
FZ/T 64094-2022 (Regenerated pallets made from wasted textile) is available as an English-translated PDF.
FZ/T 64094-2022 - This document specifies the terms and definitions, requirements, test methods, inspection rules, signs, transportation and storage of waste textile recycled pallets.
This document is applicable to the flat size of 1 100 mm × 1 100 mm produced with waste textile cloth and reprocessed short fibers as the main raw materials and recycled single-sided pallets of 1.200 mm x 1 000 mm.
The design and production of pallets with other flat dimensions can be used as a reference.
Found what you need?
Document preview — FZ/T 64094-2022
National Standard of the People's Republic of China
- ICS
- 59.080.99
Contents
- Foreword
- 1 Scope
- 2 Normative References
- 3 Terms and Definitions
- 4 Requirements
- 4.1 Dimensions and Tolerances
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.
Please note that some contents of this document may refer to patents. Publishing of this document the Agency assumes no responsibility for identifying patents.
1 Scope
This document specifies the terms and definitions, requirements, test methods, inspection rules, signs, transportation and storage of waste textile recycled pallets.
This document is applicable to the flat size of 1 100 mm × 1 100 mm produced with waste textile cloth and reprocessed short fibers as the main raw materials and recycled single-sided pallets of 1.200 mm x 1 000 mm. The design and production of pallets with other flat dimensions can be used as a reference.
2 Normative References
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, the dated citation documents, only the version corresponding to the date applies to this document; for undated reference documents, the latest version (including all amendments) applies to this document.
GB/T 2934 Main dimensions and tolerances of intermodal flat pallets GB/T 3716 Pallet Terminology GB/T 4996-2014 Test method for intermodal flat pallets GB/T 17657-2013 Test methods for physical and chemical properties of wood-based panels and veneered wood-based panels FZ/T 07002 Reprocessed short fibers of waste textiles
3 Terms and Definitions
The terms defined in GB/T 2934, GB/T 3716, FZ/T 07002 and the following terms apply to this document.
The main raw materials are cloth pieces obtained after pretreatment and crushing of waste textiles, reprocessed short fibers and recycled fibers.
Recycled single-sided pallets made by blending, molding and other processes.
Support foot support-leg Used to support the pallet structure and form the support structure for the pallet jack or forklift into the fork hole.
4 Requirements
4.1 Dimensions and Tolerances
The recommended nominal dimensions of waste textile recycling pallets are 1 100 mm × 1 100 mm and 1.200 mm × 1 000 mm in length and width.
The preferred pallet styles are shown in Figure 1 and Figure 2; pallet dimensions and dimensional tolerances are in accordance with Table 1, and other pallet dimensions are designed separately according to actual applications, and the dimensions Dimensional tolerances shall comply with the provisions in GB/T 2934.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 6 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2934General-purpose flat pallets for through transit of goods -- Principal dimensions and tolerances
- GB/T 3716Pallets for materials handling - Vocabulary
- GB/T 4996-2014Flat pallets - Test methods
- GB/T 17657-2013Test methods of evaluating the properties of wood-based panels and surface decorated wood-based panels
How to Download FZ/T 64094-2022
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17657-2013 — Test Methods of Evaluating the Properties of Wood-based Panels and Surface Decorated Wood-based Panels
GB/T 2934-2007 — General-purpose flat pallets for through transit of goods -- Principal dimensions and tolerances
GB/T 29340-2012 — Analysis of water used in boil and cooling system - Determination of chloride - Ammonium thiocyanate titration method
Secure payment via Stripe
Payments accepted
FZ/T 64094-2022
$150.00