FZ/T 63007-2007Cotton embroidery threads (English PDF)
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for FZ/T 63007-2007 in 30 minutes.
Issued by
National Development and Reform Commission of the People's Republic of China
Level / Type
National · Recommended
Issue date
November 14, 2007
Implementation date
May 1, 2008
Scope
FZ/T 63007-2007 (Cotton embroidery threads) is available as an English-translated PDF.
FZ/T 63007-2007 — This standard specifies requirements for cotton embroidery thread products, grading regulations, test methods, inspection rules, packing, transport and storage. This standard applies to identify quality cotton embroidery thread.
Found what you need?
Document preview — FZ/T 63007-2007
National Standard of the People's Republic of China
- ICS
- 59.080.20
- Classification
- W 12
- Replacing
- FZ/T 63007-1999
Issued by: National Development and Reform Commission of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Requirements
- 3.1 Requirements cotton embroidery thread
- 3.2 Internal quality cotton embroidery thread
Foreword
This standard JISL2101:2000 "Cotton sewing thread" non-equivalent, the following indicators is present standard technical requirements Relevant indicators developed by.
--- Linear density deviation ratio;
--- Single line breaking strength;
--- Singlet breaking strength coefficient of variation.
Instead of the standard FZ/T 63007-1999 "cotton embroidery threads." this standard FZ/T 63007-1999 compared to the main changes are as follows.
--- Inherent quality, appearance quality indicators divided into superior products, first-class products, qualified products;
--- Increase in the variety;
--- Linear density increase rate deviation assessment;
--- Increase singlet breaking strength coefficient of variation assessment;
--- Color fastness increase;
--- Color requirements increase.
The standard proposed by China Textile Industry Association.
This standard by the Shanghai textile industry technical supervision of the centralized.
This standard was drafted. Shanghai textile industry technical supervision.
This standard replaces the standards previously issued as follows.
--- ZBW58001-1989;
--- FZ/T 63007-1999.
Cotton embroidery thread
1 Scope
This standard specifies requirements for cotton embroidery thread products, grading regulations, test methods, inspection rules, packing, transport and storage.
This standard applies to identify quality cotton embroidery thread.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms of dated references, all subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to study under this agreement is standard Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB 250 assessing change in color like the gray card GB 251 gray scale for assessing staining sample card GB/T 398-1993 cotton yarn qualities Textile yarn twist 2543.1 Determination of GB/T Part 1. Direct counting method GB/T 3916 Textiles - Determination of yarn single yarn breaking strength and elongation at break GB/T 3920 Textiles Tests for color fastness rubbing fastness GB/T 3921.3 Textiles Tests for color fastness Colour fastness to washing. Test 3 Determination of GB/T 4743-1995 yarn count (or count) of the skein method GB/T 4856 Knitwear Packaging GB 5296.4 consumer use of textiles and apparel GB 18401 National Safety Technical Code for Textile Products
3 Requirements
3.1 Requirements cotton embroidery thread
Cotton embroidery thread requirements are divided into intrinsic quality and appearance quality. Intrinsic quality including single line breaking strength, linear density deviation rate, single line break Strength coefficient of variation, color fastness to washing, rubbing fastness, length tolerance rate (or weight tolerances rate), the number of knots, etc. 7. outer View of surface quality including seven knots, stains, color, flower color, Sandwich, Ma negligent line, cobweb, lack of edge lines of the die and the like.
3.2 Internal quality cotton embroidery thread
3.2.1 combed cotton embroidery LINES breaking strength requirements in Table 1.
Table Embroidery LINES breaking strength of claim 1 combed cotton
Linear density /
tex (English count)
Number of shares
Singlet breaking strength/(cN/50cm) not lower than Twist/(twists/10cm) (reference) First-class product First grade Qualified final twist twist Twist 64 (9) 2 2370 2260 2150 32 ± 2 ZS 29 (20) 2 × 2 2000 1960 1860 114 ± 4 54 ± 2 ZSZ 19.5 (30) 2 × 6 3470 3300 3130 52 ± 2 6 ± 1 SZS 19.5 (30) 2 580 550 520 52 ± 2 SZ 18 (32) 2 530 500 470 50 ± 2 SZ
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 398-1993Cotton grey yarn
- GB/T 3916Textiles -- Yarns from packages -- Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
- GB/T 3920Textiles - Tests for colour fastness - Colour fastness to rubbing
- GB/T 4743-1995Textiles -- Yarn from packages -- Determination of linear density (mass per unit length) by the skein method
- GB/T 4856Package of cotton goods and kintwear
- GB 5296.4[GB/T 5296.4-2012] Instructions for use of products of consumer interest -- Part 4: Textiles and apparel
GB 250 · GB 251 · GB/T 3921.3
How to Download FZ/T 63007-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 18401-2010 — National general safety technical code for textile products
GB 25029-2010 — Steel slag cement for road
GB 25034-2020 — Gas-fired heating and hot water combi-boiler
Secure payment via Stripe
Payments accepted
FZ/T 63007-2007
$234.00