Valid

FZ/T 60029-2021Test method for fluff shedding of blanket (English PDF)

毛毯脱毛测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (5 pages)

Need quotation for your management?

Get a formal quotation for FZ/T 60029-2021 in 30 minutes.

Issued by

Ministry of Industry and Information Technology of the People's Republic of China

Level / Type

National · Recommended

Issue date

January 1, 1970

Implementation date

January 1, 1970

Scope

FZ/T 60029-2021 is the English-translated version of 毛毯脱毛测试方法.

FZ/T 60029-2021 — This document specifies the test method for the amount of hair removal of felt products. This document is applicable to the testing of the amount of depilation of blankets.

Found what you need?

Document preview — FZ/T 60029-2021

National Standard of the People's Republic of China

ICS
59.080
Classification
W 56

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Principle
  • 5 Instruments and utensils
  • 5.1 Hair removal tester
  • 5.2 Brush

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules of Standardization Documents" Drafting.

This document replaces FZ/T 60029-1999 "Test Method for Felt Depilation", compared with FZ/T 60029-1999, except for editorial changes in addition, the main technical changes are as follows.

---Modified the scope of application (see Chapter 1, Chapter 1 of the 1999 edition);

---Added normative reference documents (see Chapter 2);

--- Deleted "brush area" and "brush holder pressure" and "tweezers" in the instruments and appliances (see 4.1.4, 4.1.6, 4.8 in the 1999 edition);

---Increase the size deviation of the instrument and equipment, adjust the specification and deviation and the expression of the instrument accuracy (see Chapter 5, 1999 edition Chapter 4);

---Modified the standard atmosphere for humidity control and testing (see Chapter 6, Chapter 5 of the 1999 edition);

---Modified the "sample" (see Chapter 7, Chapter 6 of the 1999 edition);

---Modified and adjusted the "Test Technical Regulations" and "Operation Procedures" (see Chapter 8, Chapter 7 and Chapter 8 of the 1999 edition);

---Adjusted and revised "experimental result display" and "calculation" (see Chapter 9, Chapter 9 and Chapter 10 of the 1999 edition);

---Modified the formula for calculating the amount of hair removal (see Chapter 9, Chapter 9 of the 1999 edition);

---Appendix A was deleted, and the content was adjusted to Chapter 5 of the main text;

---Adjust Appendix B to Appendix A;

---Appendix C and Appendix D have been deleted.

This document was proposed by the China National Textile and Apparel Council.

This document is under the jurisdiction of the Wool Textile Subcommittee of the National Textile Standardization Technical Committee (SAC/TC209/SC3).

Drafting organizations of this document. Shandong Shenghao Home Textile Co., Ltd., Beijing Wool Textile Research Institute Inspection Center, Beijing Textile Metrology and Energy Saving Technology development center.

1 Scope

This document specifies the test method for the amount of hair removal of felt products.

This document is applicable to the testing of the amount of depilation of blankets.

2 Normative references

The contents of the following documents constitute the indispensable clauses of this document through normative references in the text. Among them, dated quotations Only the version corresponding to that date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB/T 6529 Standard atmosphere for textile humidity control and testing GB/T 8170 Numerical rounding rules and the expression and determination of limit values

3 Terms and definitions

The following terms and definitions apply to this document.

Amountoffluffshedding Under the specified conditions, the amount of fiber falling off per 100cm2 of the sample rubbed with the brush.

4 Principle

Under the specified conditions, after a certain number of brushings between the brush and the carpet surface, weigh and calculate the amount of hair removal of the sample.

5 Instruments and utensils

5.1 Hair removal tester

5.1.1 The brush of the depilation tester is mechanically driven, making linear and curved motions, and brushing in one direction.

5.1.2 Brush stroke. (270±2)mm.

5.1.3 Brush reciprocating speed. 26 times/min.

5.1.4 The weight of the brush holder. (1090±2.5)g.

5.2 Brush

5.2.1 The specification of the brush plate. 100mm×76mm×11mm.

5.2.2 Tufting area. (74±2)mm×(52±2)mm.

5.2.3 Aperture of planting hair. phi=4mm.

5.2.4 Tufting hole distance. 6mm (longitudinal) × 5.84mm (horizontal).

5.2.5 The number of hair transplanted per hole is about 160.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 5 pages — is available in the English PDF.

Referenced standards

How to Download FZ/T 60029-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
5 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

FZ/T 60029-2021

$135.00