FZ/T 13012-2014Carded polyester and cotton blended grey fabric (English PDF)

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

This standard is a revision of FZ/T 13012-2006 "carded polyester and cotton gray fabric", the main changes the following.

--- Increasing the standard range of industrial polishing carded polyester and cotton gray fabric;

--- Width, density, breaking strength is adjusted to the width deviation name, density deviation rate, breaking strength deviation rate, increase the fiber content of bias Poor assessment, the rate of Excellence for width deviation index tightened, density deviation of plus or minus error rate of rate adjustment and improved test warp density superior product Nuclear targets, minimum breaking strength evaluation value adjustment for the assessment breaking strength deviation ratio;

--- Warp and weft obvious defect Rating made some adjustments, increased fabric defects meter;

--- Increasing industrial requirements of the polishing pad;

--- Original Appendices A, B adjusted to Appendix B, Appendix C. Appendix C is adjusted to the original Appendix A, complement defects Name of content.

The standard proposed by China Textile Industry Association.

This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized.

This standard was drafted. Jiangsu Health Group Co., Ltd., Changzhou-home-Textile Co., Ltd., Shanghai Textile Industrial Technology Authority, China Textile Industry Association.

1 Scope

This standard specifies the carded polyester and cotton blended gray fabric product classification, requirements, cloth defect score, test methods, inspection rules, marks, Packaging, transport and storage.

This standard applies to the production of carded woven polyester and cotton gray fabric.

This standard does not apply to special purpose jacquard fabrics and fabrics (except industrial polishing).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 406-2008 qualities of cotton cloth GB/T 2910.11 Textiles - Quantitative chemical analysis Part 11. cellulose fiber and polyester fiber mixture (sulfuric acid) GB/T 3923.1 Part 1 textile fabric tensile properties. breaking strength and elongation measurement (strip method) Determination of GB/T 4666 Textiles length and width of Determination of GB/T 4668 woven fabric density GB/T 8170 repair value expressed about the rules and limit values and judgment FZ/T 10004 cotton and chemical fiber spinning pure, blended gray fabric inspection rules FZ/T 10006 cotton and chemical fiber spinning pure, blended qualities Bumian junction impurity lattice defect rate test FZ/T 10009 cotton and chemical fiber spinning pure, blended gray fabric marking and packaging Category 3 Carded polyester and cotton blended fabric qualities of product variety, size classification according to user needs, in accordance with Appendix A to develop.

4 Requirements