CJ/T 502-2016Brass fittings for press joint (English PDF)
This is a limited preview
Buy now to download the full PDF (32 pages)
Need quotation for your management?
Get a formal quotation for CJ/T 502-2016 in 30 minutes.
Issued by
Ministry of Housing and Urban-Rural Development of the People's Republic of China
Level / Type
National · Recommended
Issue date
September 6, 2016
Implementation date
March 1, 2017
Scope
CJ/T 502-2016 (Brass fittings for press joint) is available as an English-translated PDF.
CJ/T 502-2016 — This standard specifies the terms and definitions of compression brass fittings (hereinafter referred to as fittings), classification and marking, materials, requirements, test methods, seized Inspection rules and signs, packaging, transportation and storage.
This standard applies to the nominal pressure PN is not greater than 1.6MPa, nominal size DN is not greater than 100mm, used to transport domestic water (cold Water, hot water), drinking water, compressed air and other non-corrosive media, the temperature of the medium is not greater than 110 °C brass piping pressure brass fittings.
Found what you need?
Document preview — CJ/T 502-2016
National Standard of the People's Republic of China
- ICS
- 91.140.60
- Classification
- P 42
Issued by: Ministry of Housing and Urban-Rural Development of the People's Republic of China
Contents
- Document data1
Document data
Chinese classification (CCS): P42.
Estimated length of the Chinese original: 35,343 words.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 32 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1176-2013Casting copper and copper alloys
- GB/T 1804-2000General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 2040-2008Copper and copper alloy sheet
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 7306.1Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 1: Parallel internal and taper external threads
- GB/T 7306.2Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads. Part 2: Taper internal and external threads
How to Download CJ/T 502-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1176-2013 — Casting copper and copper alloys
GB/T 12716-2011 — Pipe threads with the thread angle of 60 degrees where pressure-tight joints are made on threads
GB/T 17219-2025 — Hygienic safety evaluation of distribution equipment, protective materials and treatment materials in drinking water system
Secure payment via Stripe
Payments accepted
CJ/T 502-2016
$535.00