Silicone is everywhere in the kitchen: baking moulds, spatulas, ice cube trays, folding lunch boxes, lid seals, baby bottle teats. Until now, China treated it as just one more kind of rubber. Not any more.
Since September 2, 2026, food-contact silicone in China has its own mandatory standard: GB 4806.16-2025. It sets a list of allowed raw materials, four test limits, and a brand-new test for volatile substances. If you make, sell or import silicone products that touch food, this is the document your test report must follow.
In short
- What it is
- China's National Food Safety Standard for silicone rubber materials and products that touch food
- Applies to
- All food-contact silicone rubber materials and products
- Replaces
- The silicone rules in GB 4806.11-2016 (rubber)
- Issued by
- National Health Commission and SAMR, September 2, 2025
- In force
- September 2, 2026
- Biggest changes
- Own standard for silicone · positive list of raw materials · new volatile substances test (max 0.5 g/100 g)
Why a separate standard for silicone?
Before, food-contact silicone fell under the general rubber standard, GB 4806.11-2016. But silicone is a different material. It is made from polysiloxane (a chain of silicon and oxygen) and silica, cured into a rubber. It is used at high temperatures, in ovens and for baby products, where the rules need to be specific.
GB 4806.16-2025 takes the silicone rules out of the rubber standard and gives them their own document. The standard defines food-contact silicone as materials and products "primarily made from organosilicon elastomers formed by the cross-linking and curing of polysiloxane polymers and hydrophobic silica" that touch, or may touch, food.
What does the standard require?
Think of it as five layers of checks:
- General rules. Everything in GB 4806.1, the general safety standard for all food-contact materials, still applies.
- Raw materials from a list. The basic raw materials must be on the list in Appendix A, or in an official announcement.
- Additives from GB 9685. Any additive must be allowed by GB 9685, the food-contact additives standard.
- Sensory check. Normal colour, no strange smell, no impurities. The test liquid must not change colour, go cloudy, form deposits or smell odd.
- Physical and chemical limits — see the table below.
The test limits
| Test | Limit | What it tells you |
|---|---|---|
| Total migration | 10 mg/dm² or less | How much material in total moves from the silicone into food |
| Potassium permanganate consumption | 10 mg/kg or less | How much organic matter leaks into water |
| Heavy metals (as lead) | 1 mg/kg or less | Metals released into acidic food |
| Volatile substances (new) | 0.5 g/100 g or less | How much of the silicone itself evaporates when heated |
Each limit comes with its own test conditions — food simulant, temperature and time — and products for babies and toddlers have a different way of calculating total migration. On top of these, every raw material and additive has its own limits (SML, SML(T) and QM). The exact conditions and figures are in the standard and in GB 9685.
The new volatile substances test
This is the test most suppliers will meet for the first time. The idea is simple: the lab heats a sample of your silicone at 200 °C and weighs how much it loses. The loss must be 0.5 g per 100 g or less. Appendix B sets the full method: how to prepare and cut the sample, how long to dry and heat it, and the extra step for baby bottle teats.
An example: a silicone sample loses 0.40 g per 100 g. That passes. A sample that loses 0.60 g per 100 g fails — even if every other test is fine.
In practice, many silicone makers post-cure their parts: they bake them after moulding to drive off the volatile substances. If your process has no post-cure step, or a short one, test early.
The allowed raw materials
Appendix A is a positive list: it names the basic raw materials you may use, each identified by its CAS number — the polysiloxanes, silica and other building blocks of silicone. Some entries come with extra conditions, such as a maximum residue or a minimum molecular weight.
The rule is strict: a raw material that is not on the list, or in a later official announcement, cannot be used. Checking your formulation against the list, CAS number by CAS number, is the first job.
Coatings, inks and glue
If your silicone product is printed, coated or glued, those parts must also meet their own food-contact standards for coatings, inks and adhesives. A printed logo on a silicone spatula is part of the food-contact article too.
Common mistakes
- Testing to the old rubber standard. Since September 2, 2026, a test report to GB 4806.11 does not cover the silicone rules of GB 4806.16.
- Forgetting the volatile test. It is new, and older test reports don't have it.
- Checking the base silicone but not the additives. Pigments and other additives must be allowed by GB 9685, with their limits. Read our guide to GB 9685.
- Treating baby products like the rest. Products for babies and toddlers have their own way of calculating total migration, and teats get extra preparation before the volatile test.
What should you do now?
- List your silicone products that touch food, including seals and gaskets inside appliances.
- Check every raw material against Appendix A, and every additive against GB 9685.
- Get new test reports to GB 4806.16-2025, including volatile substances.
- Review your post-cure process if volatile results are close to 0.5 g/100 g.
- Check labels against GB 4806.1.
Your lab and your supplier need the exact wording: the full raw-material list, the test conditions for each limit and the volatile substances method.
Get the full English PDF of GB 4806.16-2025 now — instant download, invoice included. You will usually need the general rules too: GB 4806.1-2016 and GB 9685.