Valid

YY/T 1771-2021Standard test method for determination of transformation temperature of nickel-titanium shape memory alloys by bend and free recovery (English PDF)

弯曲-自由恢复法测试镍钛形状记忆合金相变温度

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YY/T 1771-2021 in 30 minutes.

Issued by

NMPA

Level / Type

Industry · Recommended

Issue date

March 9, 2021

Implementation date

April 1, 2022

Scope

YY/T 1771-2021 is the English-translated version of 弯曲-自由恢复法测试镍钛形状记忆合金相变温度.

YY/T 1771-2021 is the Chinese pharmaceutical industry standard that gives the test method for determining the martensite to austenite transformation temperature of a nickel-titanium alloy by following the strain recovered as the specimen is heated, that is the bend and free recovery method.

It sets out the specimen and its deformation in the martensitic state, the heating and the measurement of recovery, and the way the transformation temperatures are read from the resulting curve.

It applies to nickel-titanium alloys that are fully annealed or heat treated, the alloys of superelastic implants and instruments. Issued on 9 March 2021, it has applied since 1 April 2022.

Found what you need?

Document preview — YY/T 1771-2021

National Standard of the People's Republic of China

Classification
C 35

Issued by: National Medical Products Administration of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Abbreviations
  • 5 Overview of test methods
  • 6 Significance and Application
  • 7 Instrument
  • 8 Sample
  • 9 Metering
  • 10 Procedure
  • 11 Measurement of phase transition temperature
  • 12 Report
  • Appendix A (informative appendix) Theoretical basis
  • Appendix B (informative appendix) Schematic diagram of non-contact vision test system

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

1 Scope

This standard specifies a test method for determining the transformation temperature of martensite to austenite by measuring the deformation recovered during the thermal conversion process.

This standard applies to nickel-titanium alloys that are fully annealed or heat-treated.

Note. This standard is not an attempt to explain all the safety issues involved, even those related to its use. Establish proper safety and Health regulations, as well as the applicability of clear management restrictions prior to application, are the responsibility of the users of this standard.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this document. For undated reference documents, the latest version (including all amendments) is applicable to this document.

YS/T 1064-2015 Nitinol shape memory alloy terminology

3 Terms and definitions

The terms and definitions defined in YS/T 1064-2015 and the following are applicable to this document.

3.1 Freerecovery

The shape memory alloy deformed by the low-temperature phase transforms into austenite during the heating process, and has free and unconstrained recovery action.

3.2 95% recovery deformation austenite finish temperature

Af-95 The austenite of the bent and freely recovered finished wire, finished pipe or finished part measured by the method of recoverable deformation up to 95% The end temperature of the transition.

3.3 Tangent method austenite finish temperature

Af-tan The end temperature of austenite transformation of the finished wire, finished pipe or finished part that is bent and freely recovered by the tangent method.

3.4 R'phase start temperature R'-phasestarttemperature

Rs' In the heating process of two-stage transformation, the starting temperature of martensite transformation into R phase.

3.5 R'phase finish temperature R'-phasefinishtemperature

Rf' In the heating process of the two-stage transformation, the martensite transforms to the completion temperature of the R phase.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download YY/T 1771-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YY/T 1771-2021

$180.00