YY/T 1506-2016Implants for surgery—Test method for driving torque of metallic bone screws (English PDF)
外科植入物金属接骨螺钉旋动扭矩试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 1506-2016 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
July 29, 2016
Implementation date
June 1, 2017
Scope
YY/T 1506-2016 is the English-translated version of 外科植入物金属接骨螺钉旋动扭矩试验方法.
YY/T 1506-2016 is the Chinese pharmaceutical industry standard that gives the test method for measuring the torque needed to drive a metallic bone screw into a standard material.
The values it yields are not directly related to the torque needed to insert the screw into human bone, and the purpose of the method is to confirm the consistency of a product and to compare one product with another. Issued on 29 July 2016, it has applied since 1 June 2017.
Found what you need?
Document preview — YY/T 1506-2016
National Standard of the People's Republic of China
- Classification
- C 35
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative reference documents
- 3 Equipment
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
The use of re-drafting of this standard refers to ASTM F543-2013 Appendix A2 "Medical metal screw screw rotation test method" prepared by.
1 Scope
This standard is used to measure the torque required for the metal screw (hereinafter referred to as "screw") to be screwed into the standard material. Use this standard The result is not directly related to the rotational torque required for the screw to be inserted into the human bone. The purpose of this standard is to confirm only one of the tested products To cause.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
JJG 269 Torsion Testing Machine Verification Regulation
3 Equipment
3.1 Test device
The device shown in Fig. 1 can be applied to a screw-in torque test. The test device shall be capable of testing with ASTM F1839 material Block, test block fixture, drill sleeve and description of the drill sleeve clamp tooling fit. The test device should have sufficient stiffness to allow the test to be loaded No deflection or deformation occurs.
3.2 Torque sensor
The converter that converts the applied torque into a continuously recordable electrical signal is calibrated within the range of the range used in the test.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download YY/T 1506-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJG 269-2006 — Verification Regulation of Torsion Testing Machines
YY/T 0297-2026 — General requirements for clinical investigation of medical devices
YY/T 0479-2026 — Medical diagnostic X-ray tube assemblies and X-ray source assemblies - Determination of maximum symmetric radiation field
Secure payment via Stripe
Payments accepted
YY/T 1506-2016
$89.00