YY/T 1436-2016Aids for ostomy and incontinence—Irrigation sets—Requirements and test methods (English PDF)
造口术和失禁辅助器具灌洗器要求和试验方法
This is a limited preview
Buy now to download the full PDF (22 pages)
Need quotation for your management?
Get a formal quotation for YY/T 1436-2016 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
January 26, 2016
Implementation date
January 1, 2017
Scope
YY/T 1436-2016 is the English-translated version of 造口术和失禁辅助器具灌洗器要求和试验方法.
YY/T 1436-2016 is the Chinese pharmaceutical industry standard for the irrigation set used in the care of a colostomy, the equipment with which the stoma is flushed.
It sets the performance requirements and the test methods for the set, covering the materials and their biological evaluation to GB/T 16886.1, the capacity and the graduations of the water container, the cone or tube inserted into the stoma, the strength and tightness of the connections and of the tubing, the flow control, and the marking and instructions. Issued on 26 January 2016, it has applied since 1 January 2017.
Found what you need?
Document preview — YY/T 1436-2016
National Standard of the People's Republic of China
- ICS
- 11.180.20
- Classification
- C 45
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative reference documents
- 3 Terms and definitions
Foreword
This standard is drafted in accordance with the rules given in GB/T 1.1-2009.
This standard uses the re-drafting method to modify the use of ISO 16391.:2002 "Ostomy and incontinence Aids Washers Requirements and tests method".
The technical differences between this standard and ISO 16391.:2002 are as follows.
--- The requirements of Section 4.1 are the dimensions between any two tick marks in the volume indication (3.17) described in ISO 16391.:2002 The difference should not deviate from the actual measured actual volume difference of ± 15% "modified to" volume indication (3.17) in any two scales The actual measured volume difference between the lines should not deviate from the ± 15% of the difference in volume between the two scale lines to facilitate the test Operation and result comparison.
--- 6.3.4 The results of the unit by the ISO 16391.:2002 in the "liter per minute" modified to "ml per minute", and the requirements of the requirements of 4.3 Units are consistent.
1 Scope
This standard specifies the performance requirements and test methods for the lavage for colostomy care.
2 Normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this document. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 16886.1 Biological evaluation of medical devices - Part 1. Evaluation and testing in risk management
3 Terms and definitions
The following terms and definitions apply to this document. Some of these terms are shown in Fig.
3.1 Belt belt
A soft band wrapped around the waist, connected to the platen of the discharge tube.
3.2 Colostomy
Between the colon and the body surface through the surgical operation of the stoma.
3.3 Connector
Devices that connect lavage equipment components.
3.4 Exhaust system
The combination of components for colostomy discharge consists of a discharge tube, a pressure plate, a stoma hole, a hook and a belt.
3.5 Drained pipe drainagesleeve
The fluid from the colon stoma is transferred to the sleeve of the waste collection container.
3.6 Flow regulator
A device for regulating the flow of irrigation water.
Note. The flow regulator can be adjusted between the closed position and the fully open position.
3.7 Flow indicator
A device for indicating the flow of irrigation water.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download YY/T 1436-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 16886.1-1997 — Biological evaluation of medical devices--Part 1: Guidance on selection of tests
GB/T 16886.1-2001 — Biological evaluation of medical devices - Part 1: Evaluation and testing
GB/T 16886.1-2011 — Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process
YY/T 1436-2016
$145.00