YY/T 1284.2-2015Dental tweezers - Part 2: Meriam types (English PDF)

Foreword

YY/T 1284 "Dental tweezers" standard consists of the following three parts.

--- Part 1. General requirements;

--- Part 2. Two curved;

--- Part 3. single-curved. This section YY/T 1284 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules.

This section instead of YY/T 0686-2008 "medical forceps" in the dental tweezers section.

The partial modification of the use of ISO 15098-2:2000 "Dental tweezers - Part 2. Double curved." This part of ISO 15098-2:2000 The main differences are as follows.

--- On normative references, this part has been adjusted technical differences, in order to adapt our technical conditions, the adjusted situation Focus is reflected in the status of Chapter 2, "Normative references", the specific adjustments are as follows.

- equivalents adoption of international standards GB/T 9937.3 instead of ISO 1942-3;

- with the modified use of international standards YY/T 1284.1 instead of ISO 15098-1;

--- Modify the positioning pin (see 4.5) requirements;

--- Modify the identification, tags and labels (see Chapter 5) content.

1 Scope

YY/T 1284 This section provides the double curved dental tweezers, including special requirements include the size. This section applies to the double curved dental tweezers.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 9937.3 Oral Vocabulary - Part 3. dental instruments (GB/T 9937.3-2008, ISO 1942-3. 1989, IDT)

YY/T 1284.1-2015 Dental tweezers - Part 1. General requirements (ISO 15098-1:1999, MOD)

3 Terms and Definitions GB/T

9937.3 and define the following terms and definitions apply to this document.

4 Design and Dimensions