Valid

YY/T 1250-2014Insulin quantitative labelling immunoassay kit (English PDF)

胰岛素定量标记免疫分析试剂盒

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YY/T 1250-2014 in 30 minutes.

Issued by

NMPA

Level / Type

Industry · Recommended

Issue date

June 17, 2014

Implementation date

July 1, 2015

Scope

YY/T 1250-2014 is the English-translated version of 胰岛素定量标记免疫分析试剂盒.

YY/T 1250-2014 is the Chinese pharmaceutical industry standard for the kit that measures insulin quantitatively by a labelled immunoassay.

It specifies the classification, the requirements, the test methods, the marking, the labelling, the instruction manual and the rules for packaging, transport and storage, covering the appearance, the traceability of the calibrator, the accuracy, the linear range, the detection limit, the precision, the cross-reaction with proinsulin and the stability. Issued on 17 June 2014, it has applied since 1 July 2015.

Found what you need?

Document preview — YY/T 1250-2014

National Standard of the People's Republic of China

ICS
11.100
Classification
C 44

Issued by: National Medical Products Administration of the People's Republic of China

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 4 Requirements

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules.

1 Scope

This standard specifies the quantitative insulin labeled immunosorbent assay kit for the classification, requirements, test methods, marking, labeling, manual, package Loading, transport and storage.

This standard applies to the double antibody sandwich method for the quantitative determination of the principles of human insulin (h-INS) kit (hereinafter referred to as. INS agents box). Including enzyme-labeled, (electro) chemiluminescent labels, (time-resolved) fluorescent labels as capture antibody labeling method, in microplates, tubes, magnetic Granules, beads and plastic beads coated with an antibody to the carrier, the quantitative determination of human insulin immunoassay kit. This standard does not apply to.

Human insulin agents (such as a) with colloidal gold or other qualitative or semi-quantitative determination mark. strip, etc.);

b) the categories of persons with 125I and other radiolabeled insulin RIA or IRMA kit.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 191 Packaging - Pictorial signs Category 3 INS kit according to different labeling methods can be divided into INS enzyme labeling kit (electro) chemiluminescent labels INS kit (time Resolved) fluorescence labeled INS kit etc; according to the solid support can be divided into microtiter plate, pipe, magnetic particle, microsphere beads and plastic beads As carrier INS kit; it can be divided according to the different operating procedures manual method and apparatus for automatic operation of law INS kit.

4 Requirements

4.1 Appearance and physical examination

The kit components should be complete, and outside packaging should be complete, clear labels, no leakage of liquid reagent, lyophilized component was loose body, adding purified After re-solvent such as water should be within 10min to dissolve, no sediment or floc.

4.2 Linear

In 5.0mIU/L ~ 160mIU/L range, double logarithmic or other appropriate mathematical model fitting, the dose - response curve linear phase Relationship Number (r) shall not be less than 0.9900.

Note: The lower limit of the linear range of not more than 5.0mIU/L, the upper limit of the linear range of not less than 160mIU/L.

4.3 The minimum detection limit

Should not be higher than 2.0mIU/L.

4.4 Accuracy

Kit calibrator with the corresponding concentrations of insulin national (or international) standards were analyzed simultaneously determined double logarithmic or other appropriate

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download YY/T 1250-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YY/T 1250-2014

$145.00