YY/T 1135-2008Bone scissor (English PDF)
骨剪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 1135-2008 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
October 17, 2008
Implementation date
January 1, 2010
Scope
YY/T 1135-2008 is the English-translated version of 骨剪.
YY/T 1135-2008 is the Chinese pharmaceutical industry standard for bone scissors, the surgical instruments used to cut and trim the human skeleton.
It sorts the scissors by classification and type, among them single-joint models with straight round, curved round and bent round jaws, fitted with plain or patterned handles, and gives basic dimensions for each.
Requirements, test methods and inspection rules follow, aligned with the general technical conditions for rongeurs and scissors in YY 1122-2005, with stainless steel to GB/T 1220-2007, and marking, packaging, transport and storage close the document.
Compared with the earlier edition it widens the range of bone scissor types. It replaces YY 91135-1999 and WS2-222-1976. Issued on 17 October 2008, it has applied since 1 January 2010.
Found what you need?
Document preview — YY/T 1135-2008
National Standard of the People's Republic of China
- ICS
- 11.040.30
- Classification
- C 35
- Replacing
- YY/T 91135-1999
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
Foreword
This standard replaces YY 91135-1999 "bone cut." This standard YY 91135-1999 compared to major changes are as follows.
--- Standard expands the type of bone cut;
--- Standard Press YY 1122-2005 "rongeur (scissors) General technical conditions" provisions, re-revised.
The standard surgical instrument by the National Standardization Technical Committee and centralized.
This standard by the Shanghai Medical Devices (Group) Co., Ltd. is responsible for drafting the surgical instrument factory.
1 Scope
This standard specifies the classification and type of bone cut, requirements, test methods, inspection rules, marking, packaging, transportation and storage.
This standard is applicable for cutting, trimming shears bone human skeleton used.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1220-2007 stainless steel rod
YY 1122-2005 rongeur (scissors) General technical conditions
3 Classification and type
3.1 shank bone cut flowers can be made with a handle or sessile flowers, types and basic dimensions bone cut should meet the requirements to FIGS. 2 and Table 1.
a) straight round, round bending, bending round mouth
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Editions of YY/T 1135
| Edition | Title | Revision | Status |
|---|---|---|---|
| YY/T 1135-2008 | Bone scissor | current edition | Current |
| YY/T 91135-1999 | Bone scissor | previous edition | Superseded |
This page sells the current edition, YY/T 1135-2008. Earlier editions are listed for reference only.
How to Download YY/T 1135-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1220-2007 — Stainless steel bars
YY 1122-2005 — General technical requirements for bone rongeurs (bone-cutting forceps)
YY/T 0297-2026 — General requirements for clinical investigation of medical devices
Secure payment via Stripe
Payments accepted
YY/T 1135-2008
$135.00