YY/T 1015-2016Ophthalmic needle holder (English PDF)
眼用持针钳
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for YY/T 1015-2016 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
January 26, 2016
Implementation date
January 1, 2017
Scope
YY/T 1015-2016 is the English-translated version of 眼用持针钳.
YY/T 1015-2016 is the Chinese standard "Ophthalmic needle holder". Its scope clause reads: This standard specifies the classification, requirements, test methods, inspection rules, marking and instructions, packaging, transport and storage of eye clamps Claim.
This standard applies to the eye with a needle clamp (hereinafter referred to as needle clamp), for eye surgery when the needle suture the eye microvascular and soft group Weaving. Its clauses include normative reference documents; classification.
Found what you need?
Document preview — YY/T 1015-2016
National Standard of the People's Republic of China
- ICS
- 11.040.30
- Classification
- C 32
- Replacing
- YY 91015-1999
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 normative reference documents
1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, marking and instructions, packaging, transport and storage of eye clamps
Claim.
This standard applies to the eye with a needle clamp (hereinafter referred to as needle clamp), for eye surgery when the needle suture the eye microvascular and soft group
Weaving.
2 normative reference documents
The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article
Pieces. For undated references, the latest edition (including all modifications) applies to this document.
GB/T 1220-2007 stainless steel rods
Titanium and titanium alloys - Grade and chemical composition GB/T 3620.1-2007
Metallic materials - Vickers hardness test - Part 1. Test methods GB/T 4340.1-2009
Test method for corrosion resistance of stainless steel medical equipment
Non - Absorbent Surgical Suture
Surgical instruments Gill shafts, screws and rivets
Surgical Instruments Signs YY/T 1052-2004
3 classification
3.1
The structure of the needle clamp and the selection of the size should be consistent with the provisions of Table 1 and Figure 1, the head can be made straight, curved and lateral bending,
Can be made with a limit lock or limit nail.
3.2
Gill shaft screw with needle clamp is selected according to YY/T 0173-2010.
Table 1 holding the needle clamp size units in millimeters
Form Length L Head Length h Head Width b Head Thickness delta
Head Curve R (For bending)
Straight, curved
Side bend
110 to 140
9 ~ 14
14 ~ 16
14 ~ 16
± 0.3
0.3 to 0.5 ± 0.05 0.25 to 0.4 ± 0.05 8 to 10
0.5 to 1.2 ± 0.07 0.4 to 0.8
0.3 to 0.5 ± 0.05 0.4 to 0.8
± 0.1 15 ~ 17
Note. (recommended value) L is 5mm pitch a file, h is 1mm pitch a file, b is 0.1mm pitch a file, delta is 0.05mm pitch a file, R is
1mm pitch a file.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
Editions of YY/T 1015
| Edition | Title | Revision | Status |
|---|---|---|---|
| YY/T 1015-2016 | Ophthalmic needle holder | current edition | Current |
| YY 91015-1999 | Ophthalmic needle holder | previous edition | Superseded |
This page sells the current edition, YY/T 1015-2016. Earlier editions are listed for reference only.
How to Download YY/T 1015-2016
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1220-2007 — Stainless steel bars
YY/T 0297-2026 — General requirements for clinical investigation of medical devices
YY/T 0463-2026 — Dentistry - Refractory investment and die materials
YY/T 1015-2016
$95.00