YY/T 0886-2013General requirements of disposable inserter for intrauterine devices (English PDF)
一次性使用宫内节育器放置器通用要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 0886-2013 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
October 21, 2013
Implementation date
October 1, 2014
Scope
YY/T 0886-2013 is the English-translated version of 一次性使用宫内节育器放置器通用要求.
YY/T 0886-2013 is the Chinese pharmaceutical industry standard that sets the general requirements for the single-use inserter of an intrauterine device.
It specifies the terms and definitions, the structural types, the requirements, the test methods, the inspection rules, the marking and the rules for packaging, transport and storage, covering the dimensions and the graduation of the tube, the plunger and the way the device is released, the strength of the parts, the materials and their biological evaluation and sterility. Issued on 21 October 2013, it has applied since 1 October 2014.
Found what you need?
Document preview — YY/T 0886-2013
National Standard of the People's Republic of China
- ICS
- 11.200
- Classification
- C 36
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Structure type
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This standard specifies the IUD placed the terms and definitions, structure type, requirements, test methods, inspection rules, marking, packaging, Transportation and storage.
This standard applies to copper IUD placement is supporting the use of. This standard is not used to correct the position of the IUD or other Use or type of IUD placers.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 2828.1 Sampling procedures for inspection - Part 1.
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 14233.1-2008 Infusion, transfusion, injection equipment - Part 1. Chemical analysis
GB/T 16886.1 Biological evaluation of medical devices - Part 1. Evaluation of the risk management process and Test Symbols - Part 1 YY/T 0466.1 medical equipment used with medical device labels, labeling and information. General requirements People's Republic of China Pharmacopoeia
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 IUD intra-uterinecontraceptivedevice
Placed in a copper intrauterine device for avoiding pregnancy, but pregnant women's ability to recover after the removal of the instrument.
3.2 Placer inserter
The IUD placed in the womb of the instruments used.
4 Structure type
4.1 Placer structure type
The basic structure of the place by placing the tube, and place the rods positioning block shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 2829Sampling procedures and tables for periodic inspection by attributes
- GB/T 14233.1-2008Test methods for infusion, transfusion, injection equipments for medical use - Part 1: Chemical analysis methods
- GB/T 16886.1Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process
How to Download YY/T 0886-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 14233.1-2008 — Test Methods for Infusion, Transfusion, Injection Equipment for Medical Use — Part 1: Chemical Analysis Methods
GB/T 16886.1-1997 — Biological evaluation of medical devices--Part 1: Guidance on selection of tests
GB/T 16886.1-2001 — Biological evaluation of medical devices - Part 1: Evaluation and testing
YY/T 0886-2013
$165.00