YY/T 0873.4-2014Dentistry—Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (English PDF)

Foreword

YY/T 0873 "Dental rotary instruments - Number coding system" is divided into seven sections.

--- Part 1. General characteristics;

--- Part 2. Shape;

--- Part 3. Characteristics burs and cutting tools;

--- Part 4. Characteristics of diamond instruments;

--- Part 5. Characteristics of root canal instruments;

--- Part 6. Characteristics of grinding equipment;

--- Part 7. Characteristics of the mandrel and special equipment. This section is YY/T Section 40873 of. This section drafted in accordance with GB/T 1.1-2009 given rules.

This part identical with ISO 6360-4:2004 "Digital coding system for dental rotary instruments - Part 4. The diamond special instruments Sign. " For ease of use, this section also made the following editorial changes. According to GB/T 1.1 requirements of a number of editorial changes;

Introduction

This section is part of a digital standard coding system for rotary instruments. All kinds of dental rotary instruments, including endodontic instruments, has been in the global scope Produced and used by dental professionals around inside.

The standard for all types of dental rotary instruments, including accessories connected thereto, to provide a common set of digital coding system.

The use of digital coding system meaning that if the system is widely used, manufacturers and traders of dental rotary instruments by The standard directory inquiry direct access to information about the device.

This standard is based on a dental rotary instruments of trade, production and dental professional needs, identification and classification of these instruments and the establishment of a pass Use the system. This standard applies to all established a dental rotary instruments and easy to understand digital coding system, this system uses 15 series Code numbers and proprietary features characterize the general instruments or instrument groups. Group 13 digits for material identification devices working portion.

Lever handles and Group 23 digits used to identify instruments, and the total length of the instrument. Group 3 3 digits for shape recognition device. Group 4 3 figures for proprietary feature recognition device group.

Group 53 digit identification device for the nominal diameter of the working portion.

Digital coding for the generic code does not provide accurate product information. This information is provided by the respective product standard dental rotary instruments.

In the application of the digital coding system to find the correct codes and characteristics, the user should see YY/T 0873.1 and YY/T 0873.2 get through Use of information, and see the next section (YY/T 0873.3 ~ YY/T 0873.7) to obtain a device or group of devices further feature information.

1 Scope

YY/T 0873 provisions of this section dedicated dental diamond rotary instruments and diamond coated cutting discs encoded digital features. this Three digits constitute part of the 15 full-array group 4 3-digit coding principle YY/T 0873.1 and YY/T 0873.2 in It has to be explained.

This section also gives 15 a 3-digit number encoded digits. This 3-digit number can be used to provide diamond rotator

Additional information mechanical and diamond-coated cutting disc. This additional information from the dental device manufacturers to decide whether to adopt.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

YY/T 1011 Dental rotary instruments with a nominal diameter label (YY/T 1011-2014, ISO 2157:1992, IDT)

YY/T digital coding system - Part 1 0873.1 Dental rotary instruments. general characteristics (YY/T 0873.1-2013, ISO 6360-1:2004, IDT)

YY/T 0873.2 Dental rotary instruments - Number coding system - Part 2. Shape (YY/T 0873.2-2014, ISO 6360-2:2004, IDT)

3 Terms and Definitions

Terms and definitions YY/T 0873.1 defined apply to this document.

4 Encoded digital features