YY/T 0848-2011Blood irradiator (English PDF)
血液辐照仪
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YY/T 0848-2011 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Recommended
Issue date
December 31, 2011
Implementation date
June 1, 2013
Scope
YY/T 0848-2011 is the English-translated version of 血液辐照仪.
YY/T 0848-2011 is the Chinese pharmaceutical industry standard for the blood irradiator whose source is a gamma emitter, used to irradiate blood for medical purposes.
It specifies its scope, the requirements and the test methods, covering the dose rate and the uniformity of the dose over the irradiation chamber, the accuracy of the timer and of the delivered dose, the shielding and the leakage radiation, the interlocks and the safety of the loading and unloading. Issued on 31 December 2011, it has applied since 1 June 2013.
Found what you need?
Document preview — YY/T 0848-2011
National Standard of the People's Republic of China
- ICS
- 11.040.99
- Classification
- C 43
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Requirements
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
1 Scope
This standard specifies the scope of blood irradiator, requirements and test methods.
This standard applies to gamma-ray source of blood irradiator (hereinafter referred to as the irradiator). Irradiator used for medical purposes blood sample Irradiation.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.
GB 4793.1 measurement, control and laboratory safety requirements for electrical equipment - Part 1. General requirements
GB 9706.1 Medical Electrical Equipment Part 1. General requirements for safety
GB/T 14710 medical electrical environmental requirements and test methods
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Sample container canister
A container during irradiation for loading blood or blood products equivalent, usually made of aluminum or steel. [ISO /ASTM 51939:2005, the definition 3.1.7]
3.2 Reference point dose
In the sample container at the reference point, the absorbed dose of ionizing radiation in the blood or other equivalent medium.
4 Requirements
4.1 Random file
Random file must contain at least the following.
a) irradiator normal operating conditions (ambient temperature, humidity, atmospheric pressure);
b) radioactive source parameters, including the name of radioactive sources, radioactive radiation type, half-life, energy radiation sources, radioactive geometrical characteristics;
c) irradiator to meet the requirements of this standard maximum source activity radionuclides;
d) source activity calibration information and calibration date;
e) Replacement of sealed radioactive sources;
f) sample container specifications and dose distribution;
g) a list of the safety device on all interlocks and radiation and their descriptions, inspection instructions and recommended its operation with the Tests Cycle;
h) When using the irradiator required dimension drawings;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 4793.1Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
- GB 9706.1Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
- GB/T 14710The environmental requirement and test methods for medical electrical equipment
How to Download YY/T 0848-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 4793.1-1995 — Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1: General requirements
GB 4793.1-2007 — Safety requirements for electrical equipment for measurement,control,andlaboratory use-Part 1:General requirements
GB 9706.1-1988 — Medical electrical equipment--Part 1: General requirements for safety
YY/T 0848-2011
$165.00