YY/T 0820-2010Dental cartridge syringes (English PDF)

Foreword

This standard is identical with ISO 9997:1999 "Dental cartridge syringes." This standard specifies the requirements for ISO metric thread sizes dental syringe barrel, and is based on information given in appendix with inch screw Grain size requirements. Appendix A of this standard is the data appendix.

1 Scope

This standard specifies the local anesthetic through a syringe inhaled, inhaled and non-inhaled from a dental syringe barrel and requirements Detection method.

This standard does not apply to the use of mechanical movements to create a high-pressure syringe barrel.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 193-2003 common thread diameter and pitch range (ISO 261:1998, MOD)

ISO 965-1 general purpose metric screw threads - Tolerances - Part 1. Principles and basic data

ISO 1942-3 Dental terminology - Part 3. Dental instruments

ISO 13402:1995 for dental surgical handpiece autoclave resistance requirements

ISO 11499 local anesthesia with a dental syringe

3 Terms and definitions

ISO 1942-3, ISO 11499 and established the following terms and definitions apply to this standard.

5 Requirements