Valid

YY/T 0621.2-2020Dentistry—Compatibility testing - Part 2: Ceramic-ceramic systems (English PDF)

牙科学 匹配性试验 第2部分:陶瓷-陶瓷体系

Preview PDF

This is a limited preview

Buy now to download the full PDF (18 pages)

Need quotation for your management?

Get a formal quotation for YY/T 0621.2-2020 in 30 minutes.

Issued by

NMPA

Level / Type

Industry · Recommended

Issue date

February 25, 2020

Implementation date

March 1, 2021

Scope

YY/T 0621.2-2020 is the English-translated version of 牙科学 匹配性试验 第2部分:陶瓷-陶瓷体系.

YY/T 0621.2-2020 is the Chinese pharmaceutical industry standard that tests the compatibility of a dental ceramic with another ceramic of different composition, as in a veneered all-ceramic restoration.

It is the second part of the YY 0621 series and sets the requirements and the test methods by which the pair is judged: the specimens of the composite structure, the firing, the examination for cracks and defects after thermal cycling and the measurements that show whether the two materials work together.

Its requirements apply to ceramics used in combination, not to a ceramic used alone. It was issued on 25 February 2020 and has applied since 1 March 2021.

Found what you need?

Document preview — YY/T 0621.2-2020

National Standard of the People's Republic of China

ICS
11.060.10
Classification
C 33
Replacing
YY 0621-2008

Issued by: National Medical Products Administration of the People's Republic of China

Contents

  • Foreword
  • Introduction
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Requirements

Foreword

YY 0621 "Dental Science Matching Test" is divided into 2 parts.

--- Part 1. Metal-ceramic system;

--- Part 2. Ceramic-ceramic system. This part is part 2 of YY 0621.

This section was drafted in accordance with the rules given in GB/T 1.1-2009.

Together with YY 0621.1, this part replaces YY 0621-2008 "Dental Metal Porcelain Restoration System".

The relationship between this part and YY 0621-2008. the original YY 0621-2008 "Dental metal porcelain restoration system" is a metal-ceramic body Department of content. There is no reference to ceramic-ceramic matching. YY 0621-2008 about dental metal and dental ceramic materials, It has been converted to GB 17168-2013 "Metal Materials for Dental Surgery and Restoration" according to ISO 22674 and ISO 6872 respectively And GB 30367-2013 "Dental Science Ceramic Materials"; YY 0621.1 only retains the metal-ceramic matching in YY 0621-2008 The content; and this part is not related to the original YY 0621-2008, ceramic-ceramic matching content.

This part uses the translation method to be equivalent to ISO 9693-2.:2016 "Dental Science Matching Test Part 2. Ceramic-Ceramic System" Compared with ISO 9693.:1999, the main changes in this part are as follows.

This part retains the determination of the thermal expansion coefficient of ceramic materials in ISO 9693.:1999, and adds the matching test of ceramic-ceramic materials. Peel/sprouting crack test and thermal shock test.

The documents in China that have a consistent correspondence with the normatively cited international documents in this section are as follows.

--- GB/T 9937 (all parts) oral vocabulary (ISO 1942, IDT);

--- GB 30367-2013 Ceramic materials for dentistry (ISO 6872.:2008, IDT).

Introduction

Dental porcelain and base porcelain are suitable for preparing all-ceramic restorations. If functioning as a denture structure, the two Matching under heat load is very important.

1 Scope

This part of YY 0621 stipulates the evaluation of the matching of the two by testing the composite structure of ceramic-ceramic materials for dental restoration Requirements and test methods.

The requirements of this part apply to ceramic materials used in combination with ceramics of different compositions, but not to ceramics used alone material.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this document. For the cited documents without date, the latest version (including all amendments) applies to this document.

ISO 1942 Dentistry-Vocabulary

ISO 6872.:2015 Dentistry-Ceramicmaterials

ISO 7405 Dentistry-Evaluation of biocompatibility of medical devices usedindentistry)

ISO 10993 Biological evaluation of medical devices

3 Terms and definitions

The terms and definitions defined by ISO 1942 and ISO 6872.:2015 and the following apply to this document.

3.1 Facing porcelain (ceramicveneer)

The entire structure of the sintered ceramic layer applied on the ceramic substrate.

3.2 Conditioning

The process of treating the base porcelain to increase its adhesion to the facing porcelain.

3.3 Liner

Applied to ceramic substrates, after sintering under appropriate time and temperature conditions, it can improve the aesthetics of the ceramic and/or increase the decorative porcelain and base The bonding between the bottom porcelain surfaces.

4 Requirements

4.1 Biocompatibility

This section does not contain qualitative and quantitative requirements for possible biological hazards, but it is recommended to refer to when evaluating possible biological hazards

ISO 10993 and ISO 7405.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 18 pages — is available in the English PDF.

Referenced standards

Normative references

ISO 1942 · ISO 6872 · ISO 7405 · ISO 10993

Similar standards

Editions of YY/T 0621.2

EditionTitleRevisionStatus
YY/T 0621.2-2020Dentistry—Compatibility testing - Part 2: Ceramic-ceramic systemscurrent editionCurrent
YY 0621-2008Dentistry—Compatibility testing - Part 2: Ceramic-ceramic systemsprevious editionSuperseded

This page sells the current edition, YY/T 0621.2-2020. Earlier editions are listed for reference only.

How to Download YY/T 0621.2-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
18 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YY/T 0621.2-2020

$165.00