YY 0755-2009Anaesthetic vaporizers - Agent-specific filling systems (English PDF)
麻醉蒸发器 麻醉剂专用灌充系统
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for YY 0755-2009 in 30 minutes.
Issued by
NMPA
Level / Type
Industry · Mandatory
Issue date
November 25, 2009
Implementation date
December 1, 2010
Scope
YY 0755-2009 is the English-translated version of 麻醉蒸发器 麻醉剂专用灌充系统.
YY 0755-2009 is the Chinese pharmaceutical industry standard that fixes the dimensions of the agent-specific filling systems of anaesthetic vaporizers, the keyed fittings by which a vaporizer can be filled only with the agent it is made for.
It does not prescribe the material of the system, but it lists what has to be considered in choosing a material that touches the liquid anaesthetic, among them its toxicity and its resistance to the agent. Issued on 25 November 2009, it has applied since 1 December 2010.
Found what you need?
Document preview — YY 0755-2009
National Standard of the People's Republic of China
- ICS
- 11.040.10
- Classification
- C 46
Issued by: National Medical Products Administration of the People's Republic of China
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 bottles
- 5 bottleneck ring
- 7 filling socket
- 8 filling rate
- 9 11 leak
- 10 filling excess protection
- 11 color-coded
- 12 information supplied by the manufacturer
- References
Foreword
This standard is equivalent to international standards ISO 5360:2006 "anesthesia anesthetic vaporizer dedicated filling system." This standard and ISO 5360:2006 The main differences are as follows.
--- ISO 5360. ISO 2006 standard referenced, has been translated into our national standards, this standard references to the corresponding national standards;
--- Increased corresponding with the relevant international standards in Table 2. GB/T 15608-2006 "Chinese Color System" in the color coding.
Appendix A of this standard is an informative annex, Annex B normative appendix.
1 Scope
This standard specifies the special evaporator anesthetic anesthetic dedicated filling system size.
This standard does not specify the structure of the material, but the choice should be part of the filling material in contact with the system liquid anesthetic consider the following factors.
a) toxicity;
b) the compatibility of the anesthetic;
c) a material leached material health hazards to a minimum.
Because of the unique properties of desflurane, this standard does not specify this anesthetic filling system size.
Note: Encourage special anesthetic bottle design connectors with anesthetic bottle bottleneck loop fastening system.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 1182-2008 Geometrical product specifications (GPS) geometric tolerances of form, orientation, location and runout tolerancing (ISO 1101:2004, IDT)
3 Terms and Definitions
The following terms and definitions apply to this standard.
3.2 Agent-specific filling system
Recognition between the anesthetic bottle and the anesthetic vaporizer dedicated function connected to the system, such as the composition of. the bottleneck portion having a bottleneck ring screw bottle, bottle Connector, adapter plug and socket filling.
Note: Appendix A lists the different types of anesthetic filling system.
3.4 Filling device
The liquid anesthetic to a dedicated filling of anesthetic evaporator assembly for connecting an anesthetic bottle.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download YY 0755-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1182-2008 — Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
YY 0017-2026 — Implants for osteosynthesis - Metallic bone plates
YY 0018-2026 — Implants for osteosynthesis - Metallic bone screws
YY 0755-2009
$235.00