Valid

YS/T 705-2009Analysis methods of aluminum hydroxide for filler conductance. Determination of chrominance (English PDF)

填料用氢氧化铝分析方法 色度的测定

Preview PDF

This is a limited preview

Buy now to download the full PDF (4 pages)

Need quotation for your management?

Get a formal quotation for YS/T 705-2009 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

December 4, 2009

Implementation date

June 1, 2010

Scope

YS/T 705-2009 is the English-translated version of 填料用氢氧化铝分析方法 色度的测定.

YS/T 705-2009 — This standard specifies the method for determination of aluminum hydroxide filler chromaticity. This standard applies to the determination of aluminum hydroxide filler chromaticity. Measuring range. L. 80.00 ~ 99.99; Rao . -0.50 ~ 0.50; Chou . -0.20 ~ 1.30.

Found what you need?

Document preview — YS/T 705-2009

National Standard of the People's Republic of China

ICS
71.060.40
Classification
H 12

Issued by: Ministry of Industry and Information Technology

Contents

  • Foreword
  • 1 Scope
  • 2 Normative references
  • 3 Terms
  • 4 Method summary
  • 5 Instruments
  • 6 Sample
  • 7 Measuring step
  • 8 Calculation of Analytical Results

Foreword

This standard adopts the International Commission on Illumination (CIE) to under D65 standard illuminant conditions 1976L Rao Chou (CIELAB) uniform color space Room with aluminum hydroxide filler represents chroma, and the International Commission on Illumination (CIE) No. 15.2 (1986) "colorimetry" color representation Consistent.

Appendix A of this standard is an informative annex.

This standard by the National Standardization Technical Committee of non-ferrous metals and centralized.

This standard by the Aluminum Corporation of China Shandong Branch, China Nonferrous Metals Industry Institute of Standards Metrology and Quality is responsible for drafting.

This standard by the Aluminum Corporation of China Zhengzhou Research Institute, Aluminum Corporation of China Zhongzhou Branch participated in the drafting.

1 Scope

This standard specifies the method for determination of aluminum hydroxide filler chromaticity.

This standard applies to the determination of aluminum hydroxide filler chromaticity. Measuring range. L. 80.00 ~ 99.99; Rao . -0.50 ~ 0.50;

Chou . -0.20 ~ 1.30.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.

GB/T 3978 standard lighting and geometric conditions Methods of measurement GB/T 3979 object colors

3 Terms

With L, Rao , Chou expressed . 1976 International Commission on Illumination (CIE) defined L Rao Chou (CIELAB) color space, L, Rao , Chou represents color index, L Representative from 0 (black) to 100 (white), red direction + Rao representatives - Rao green direction, + Chou behalf of Huang Fang to - Chou representatives of blue direction.

4 Method summary

In D65 standard illuminant and a 10 ° field of view of the conditions, the measured spectral reflection factor of the sample, the sample obtained by the integral operation tristimulus values X, Y, Z, calculated according to the colorimetry sample color L, a, Chou .

5 Instruments

Color measurement instrument. the instrument lighting conditions of observation may be vertical diffusion irradiation probe (o/d) or diffuse irradiation Sounding (d/o).

6 Sample

Sample was pretreated in an oven at 105 °C ± 5 °C drying 2h, after removal placed in a desiccator, cooled to room temperature.

7 Measuring step

7.1 preheating equipment.

7.2 Selected D65 standard illuminant and a 10 ° field of view measuring conditions, with standard board calibrate the instrument.

7.3 Preparation of the sample according to the measurement requirements (quartz cuvette or otherwise sample preparation), until the test specimen surface should be smooth and free of cracks, placed in color measurement Colorimetric values measured on a sample instrument.

8 Calculation of Analytical Results

Respectively, according to the formula (1), the equation (2) and (3) calculate the sample L, Rao , Chou value.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.

Referenced standards

How to Download YS/T 705-2009

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
4 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YS/T 705-2009

$125.00