YS/T 3049-2025Technical specifications for short-phase mining in open-pit gold mines (English PDF)
露天金矿短分期开采技术规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YS/T 3049-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 29, 2025
Implementation date
July 1, 2026
Scope
YS/T 3049-2025 is the English-translated version of 露天金矿短分期开采技术规范.
YS/T 3049-2025 is the Chinese standard "Technical specifications for short-phase mining in open-pit gold mines". This standard stipulates the basic principles and technical requirements for short-term phased mining of open-pit gold mines, and describes management methods such as monitoring, early warning, inspection, and recording.
This standard is applicable to the mining of open-pit gold mines with thick ore bodies, long service life, and road development and transportation. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-29, in force from 2026-07-01.
Found what you need?
Document preview — YS/T 3049-2025
National Standard of the People's Republic of China
- ICS
- 73.020
- Classification
- D46
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General
- 5 Groundwater Dynamic Observatory (dot) Layout of
- 5.1 General requirements for establishment
- 5.2 Observatory (point) of the principles laid
- 5.3 Layout observation point position selection
- 6 Observation wells Design and Construction
- 6.1 Classification observation hole and laid claim
- 6.2 Observation wells design and quality requirements
- 7 Inspection rules
- 8 Packaging, transportation, storage and accompanying documents
- 9 Order contents
1 Foreword
YS/T 3049-2025 was issued by Ministry of Industry and Information Technology on 29 December 2025 and has been in force since 1 July 2026.
The YS/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard stipulates the basic principles and technical requirements for short-term phased mining of open-pit gold mines, and describes management methods such as monitoring, early warning, inspection, and recording. This standard is applicable to the mining of open-pit gold mines with thick ore bodies, long service life, and road development and transportation.
YS/T 3049-2025 falls under ICS 73.020, in the field of mining and minerals.
This catalogue holds 140 other YS/T standards in that field.
In this catalogue, YS/T standards carry edition years from 1985 to 2026.
3 About this standard
Sector: Nonferrous Metallurgy Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB/T 20899.1-2019 — Methods for chemical analysis of gold ores—Part 1:Determination of gold content
YS/T 231-2015 — Tungsten concentrate
YS/T 254.1-2011 — Methods for chemical analysis of beryllium concentrate and beryl. Part 1: Determination of beryllium oxide content. Phosphate gravimetry
YS/T 3053.1-2026 — Analytical methods for mineral parameters of gold ores - Part 1: Composition analysis
YS/T 3050-2026 — Technical specification for comprehensive recovery and recycling of gold industry wastewater
YS/T 3047-2025 — Technical Requirements for Filler-Type Precious Metals Pools in Gold Mining
5 Classification and status
International classification (ICS): 73.020
Chinese Standard Classification (CCS): D 46
Prefix YS/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YS/T 3049-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YS/T 1006.2-2026 — Methods for chemical analysis of lithium nickel cobalt manganese oxide - Part 2: Determination of the elements content - Inductively coupled plasma atomic emission spectrometry
YS/T 1115.10-2026 — Chemical analysis methods of copper, lead and zinc ores and tailings - Part 10: Determination of gold, silver, molybdenum, arsenic, tungsten, bismuth, gallium, indium, thallium, selenium, tellurium and germanium contents - Inductively coupled plasma mass spectrometry
YS/T 1115.7-2026 — Methods for chemical analysis of copper, lead, zinc ores and tailings - Part 7: Determination of molybdenum content - Thiocyanate spectrophotometric method
YS/T 3049-2025
$210.00