YS/T 1047.7-2015Methods for chemical analysis of copper magnetite - Part 7: Determination of copper, manganese, aluminium, calcium, magnestium, titanium and phosphorus contents - Inductively coupled plasma atomic emission spectrometric method (English PDF)
铜磁铁矿化学分析方法 第7部分：铜、锰、铝、钙、镁、钛和磷量的测定 电感耦合等离子体原子发射光谱法
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for YS/T 1047.7-2015 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
YS/T 1047.7-2015 is the English-translated version of 铜磁铁矿化学分析方法 第7部分：铜、锰、铝、钙、镁、钛和磷量的测定 电感耦合等离子体原子发射光谱法.
YS/T 1047.7-2015 — YS/T 1047 This section provides the copper magnetite copper, manganese, aluminum, calcium, magnesium, titanium, and determination of phosphorus content.
This section applies to the copper, manganese, aluminum, calcium, magnesium, titanium and phosphorus measured amounts of copper magnetite. Measurement range (mass fraction) are shown in Table 1.
Table 1 Scope Method Element measurement range (mass fraction) /% Cu 0.10 ~ 2.50 Mn 0.050 ~ 0.50 Al 0.10 ~ 2.50 Ca 0.10 ~ 5.00 Mg 0.10 ~ 2.50 Ti 0.010 ~ 0.50 P 0.050 ~ 5.50
Found what you need?
Document preview — YS/T 1047.7-2015
National Standard of the People's Republic of China
- ICS
- 73.060.10
- Classification
- D 31
Issued by: Ministry of Industry and Information Technology
Contents
- What this standard covers1
- Document data2
- Standards quoted by this document3
What this standard covers
This Standard specifies the copper magnetite copper, manganese, aluminum, calcium, magnesium, titanium, and determination of phosphorus content. This Standard applies to the copper, manganese, aluminum, calcium, magnesium, titanium and phosphorus measured amounts of copper magnetite. Measurement range (mass fraction) in Table 1.
Document data
International classification (ICS): 73.060.10.
Chinese classification (CCS): D31.
Estimated length of the Chinese original: 9,927 words.
Standards quoted by this document
GB/T 602; GB/T 6379.2; GB/T 6682; GB/T 10322.1; GB/T 23942
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 602Chemical reagent - Preparation of standard solutions for impurity determination
- GB/T 6379.2Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
- GB/T 6682Water for analytical laboratory use - Specification and test methods
- GB/T 10322.1Iron ores - Sampling and sample preparation procedures
- GB/T 23942Chemical reagent - General rules for inductively coupled plasma atomic emission spectrometry
How to Download YS/T 1047.7-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10322.1-2023 — Iron ores - Sampling and sample preparation procedures
GB/T 23942-2009 — Chemical reagent - General rules for inductively coupled plasma atomic emission spectrometry
GB/T 602-2026 — Chemical reagent - Preparation of standard solutions for impurity determination
Secure payment via Stripe
Payments accepted
YS/T 1047.7-2015
$150.00