YD/T 6588-2025Requirements and test methods for electrical safety and lightning protection of 10kV AC input uninterruptible power system used in information communication system (English PDF)
信息通信用10kV交流输入不间断电源系统的电气安全及防雷技术要求和试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6588-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
April 1, 2026
Scope
YD/T 6588-2025 is the English-translated version of 信息通信用10kV交流输入不间断电源系统的电气安全及防雷技术要求和试验方法.
YD/T 6588-2025 is the Chinese standard "Requirements and test methods for electrical safety and lightning protection of 10kV AC input uninterruptible power system used in information communication system".
This standard specifies the electrical safety, lightning protection, and grounding technical requirements and test methods for uninterruptible power supply (UPS) systems with a medium-voltage 10kV AC input and a low-voltage AC or DC output.
This standard applies to centralized power supply scenarios in large data centers and communication stations, with a medium-voltage 10kV AC input and a low-voltage (not exceeding 1000V AC or 1500V DC) output UPS systems.
This standard does not apply to output-side electrical equipment. It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-04-01.
Found what you need?
Document preview — YD/T 6588-2025
National Standard of the People's Republic of China
- ICS
- 35.020
- Classification
- L09
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Requirements
1 Foreword
YD/T 6588-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 April 2026.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the electrical safety, lightning protection, and grounding technical requirements and test methods for uninterruptible power supply (UPS) systems with a medium-voltage 10kV AC input and a low-voltage AC or DC output. This standard applies to centralized power supply scenarios in large data centers and communication stations, with a medium-voltage 10kV AC input and a low-voltage (not exceeding 1000V AC or 1500V DC) output UPS systems. This standard does not apply to output-side electrical equipment.
YD/T 6588-2025 falls under ICS 35.020, in the field of information technology.
This catalogue holds 725 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
GB 4943.1-2022 — Audio/video,information and communication technology equipment—Part 1: Safety requirements
GB 4943.21-2019 — Information technology equipment -- Safety -- Part 21: Remote power feeding
GB 4943.23-2012 — Information technology equipment - Safety - Part 23: Large data storage equipment
YD/T 2379.3-2026 — Environmental test requirements and test methods for telecommunications equipment - Part 3: Equipment of stationary use at non-weather-protected locations
YD/T 1542.1-2026 — Requirements and test methods for surge protective devices connected to information and telecommunication systems - Part 1: General principles
YD/T 1429-2024 — Technical requirements and testing methods for lightning protection systems in use in communications bureaus (stations)
5 Classification and status
International classification (ICS): 35.020
Chinese Standard Classification (CCS): L 09
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6588-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 6588-2025
$210.00