YD/T 6579-2025Technical requirements and test method of sidelink positioning andsynchronization for LTE-based vehicular communication under out-of-GNSS coverage condition (English PDF)
基于LTE的车联网无线通信技术无GNSS信号条件下的直连通信定位同步技术要求和测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6579-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
April 1, 2026
Scope
YD/T 6579-2025 is the English-translated version of 基于LTE的车联网无线通信技术无GNSS信号条件下的直连通信定位同步技术要求和测试方法.
YD/T 6579-2025 is the Chinese standard "Technical requirements and test method of sidelink positioning andsynchronization for LTE-based vehicular communication under out-of-GNSS coverage condition".
This standard specifies the design requirements, system architecture and functional requirements, system workflow, signaling format and transmission parameters, technical requirements for roadside equipment/vehicle terminals, and test methods for a direct communication positioning and synchronization system based on LTE-based vehicle-to-everything (V2X) wireless communication technology under GNSS signal conditions.
This standard applies to roadside units (RSUs) that operate in the absence of GNSS signals and support both positioning and synchronization functions based on LTE-V2X direct communication; it also applies to onboard units (OBUs) that support synchronization functions based on LTE-V2X direct communication and can perform positioning based on LTE-V2X direct communication or other technologies such as inertial navigation.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-04-01.
Found what you need?
Document preview — YD/T 6579-2025
National Standard of the People's Republic of China
- ICS
- 33.060.99
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 6579-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 April 2026.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the design requirements, system architecture and functional requirements, system workflow, signaling format and transmission parameters, technical requirements for roadside equipment/vehicle terminals, and test methods for a direct communication positioning and synchronization system based on LTE-based vehicle-to-everything (V2X) wireless communication technology under GNSS signal conditions. This standard applies to roadside units (RSUs) that operate in the absence of GNSS signals and support both positioning and synchronization functions based on LTE-V2X direct communication; it also applies to onboard units (OBUs) that support synchronization functions based on LTE-V2X direct communication and can perform positioning based on LTE-V2X direct communication or other technologies such as inertial navigation.
YD/T 6579-2025 falls under ICS 33.060.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 3711-2020 — Technical requirement of IMS based vehicle eCall system based on public telecommunication network
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
YD/T 6577-2025 — 5G digital cellular mobile telecommunication network - Technical requirements for OTA test system based on compact antenna test range for sub 6GHz gNB equipment
YD/T 6576-2025 — 5G digital cellular mobile telecommunication network - Technical requirement of gNB equipment for MBS (Phase 1)
YD/T 6574-2025 — Technical requirements and test methods of 5G device network slicing for industry
5 Classification and status
International classification (ICS): 33.060.99
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6579-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 6579-2025
$500.00