YD/T 6574-2025Technical requirements and test methods of 5G device network slicing for industry (English PDF)
面向行业的5G终端网络切片技术要求及测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6574-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
April 1, 2026
Scope
YD/T 6574-2025 is the English-translated version of 面向行业的5G终端网络切片技术要求及测试方法.
YD/T 6574-2025 is the Chinese standard "Technical requirements and test methods of 5G device network slicing for industry".
This standard specifies the network reference architecture for providing slicing services, the technical requirements for slicing functionality in the communication protocol section (NSSAI, URSP, routing descriptors, service descriptors, etc.), the technical requirements for interoperability between slicing and 5G/4G systems, and the business requirements and technical functional requirements for slicing applications in industry scenarios such as cloud gaming, live video streaming, industrial manufacturing, security, energy and power, healthcare, and ports.
It also describes the corresponding testing methods and procedures. This standard applies to the design, development, testing, and verification of slicing functionality for 5G non-consumer industry terminals.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-04-01.
Found what you need?
Document preview — YD/T 6574-2025
National Standard of the People's Republic of China
- ICS
- 33.060.99
- Classification
- M36
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 6574-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 April 2026.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the network reference architecture for providing slicing services, the technical requirements for slicing functionality in the communication protocol section (NSSAI, URSP, routing descriptors, service descriptors, etc.), the technical requirements for interoperability between slicing and 5G/4G systems, and the business requirements and technical functional requirements for slicing applications in industry scenarios such as cloud gaming, live video streaming, industrial manufacturing, security, energy and power, healthcare, and ports. It also describes the corresponding testing methods and procedures. This standard applies to the design, development, testing, and verification of slicing functionality for 5G non-consumer industry terminals.
YD/T 6574-2025 falls under ICS 33.060.99, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 3711-2020 — Technical requirement of IMS based vehicle eCall system based on public telecommunication network
GB/T 32401-2015 — Technical requirements and measurement methods for VHF/UHF frequency
GB/T 12572-2008 — Universal requirements and measurement methods of parameters for radio transmitting equipment
YD/T 6579-2025 — Technical requirements and test method of sidelink positioning andsynchronization for LTE-based vehicular communication under out-of-GNSS coverage condition
YD/T 6577-2025 — 5G digital cellular mobile telecommunication network - Technical requirements for OTA test system based on compact antenna test range for sub 6GHz gNB equipment
YD/T 6576-2025 — 5G digital cellular mobile telecommunication network - Technical requirement of gNB equipment for MBS (Phase 1)
5 Classification and status
International classification (ICS): 33.060.99
Chinese Standard Classification (CCS): M 36
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6574-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 6574-2025
$575.00