YD/T 6535-2025Test method for industry specific single-mode non-handheld terminals of TianTong-1 mobile communication satellite system (English PDF)
天通一号卫星移动通信系统行业专用型单模非手持终端测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6535-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 17, 2025
Implementation date
April 1, 2026
Scope
YD/T 6535-2025 is the English-translated version of 天通一号卫星移动通信系统行业专用型单模非手持终端测试方法.
YD/T 6535-2025 is the Chinese standard "Test method for industry specific single-mode non-handheld terminals of TianTong-1 mobile communication satellite system".
This standard specifies the test methods for industry-specific single-mode non-handheld terminals of the Tiantong-1 satellite mobile communication system, including services, functions, user interface and menus, performance, reliability, radio frequency, audio, communication radiation interference and anti-interference, and specific absorption rate.
This standard applies to the research, design, production, and testing of industry-specific single-mode non-handheld terminal equipment using the Tiantong-1 satellite communication standard.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-12-17, in force from 2026-04-01.
Found what you need?
Document preview — YD/T 6535-2025
National Standard of the People's Republic of China
- ICS
- 33.060
- Classification
- M35
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 6535-2025 was issued by Ministry of Industry and Information Technology on 17 December 2025 and has been in force since 1 April 2026.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the test methods for industry-specific single-mode non-handheld terminals of the Tiantong-1 satellite mobile communication system, including services, functions, user interface and menus, performance, reliability, radio frequency, audio, communication radiation interference and anti-interference, and specific absorption rate. This standard applies to the research, design, production, and testing of industry-specific single-mode non-handheld terminal equipment using the Tiantong-1 satellite communication standard.
YD/T 6535-2025 falls under ICS 33.060, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
JT/T 1458-2023 — Performance requirements and testing approaches of commercial vehicle communication system (V2X) terminal
JT/T 766.2-2019 — Shipborne terminal of BeiDou navigation satellite system - Part 2: Data exchange protocols
YD/T 6506-2025 — The limits and calculation method of unwanted emission levels produced by a nongeostationary fixed-satellite service system in Ku/Ka/O/V band at radio astronomy sites
YD/T 6505-2025 — The limits and calculation method of unwanted emission levels produced by a nongeostationary fixed-satellite service system in Ka band at radio astronomy sites
YD/T 6534-2025 — Technical requirement for industry specific single-mode non-handheld terminals of TianTong-1 mobile communication satellite system
5 Classification and status
International classification (ICS): 33.060
Chinese Standard Classification (CCS): M 35
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6535-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 6535-2025
$905.00