Valid

YD/T 6505-2025The limits and calculation method of unwanted emission levels produced by a nongeostationary fixed-satellite service system in Ka band at radio astronomy sites (English PDF)

Ka频段对地静止卫星固定业务系统的最大可接受干扰电平限值及计算方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 6505-2025 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

August 19, 2025

Implementation date

December 1, 2025

Scope

YD/T 6505-2025 is the English-translated version of Ka频段对地静止卫星固定业务系统的最大可接受干扰电平限值及计算方法.

YD/T 6505-2025 is the Chinese standard "The limits and calculation method of unwanted emission levels produced by a nongeostationary fixed-satellite service system in Ka band at radio astronomy sites".

This standard specifies the maximum permissible interference level limits and related calculation methods for Ka-band Geostationary Satellite Fixed Service (GSOFSS) systems.

This document is applicable to coordination and interference calculations with Ka-band Geostationary Satellite Fixed Service systems. It was issued by Ministry of Industry and Information Technology. Issued on 2025-08-19, in force from 2025-12-01.

Found what you need?

Document preview — YD/T 6505-2025

National Standard of the People's Republic of China

ICS
33.060.30
Classification
M35

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 6505-2025 was issued by Ministry of Industry and Information Technology on 19 August 2025 and has been in force since 1 December 2025.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the maximum permissible interference level limits and related calculation methods for Ka-band Geostationary Satellite Fixed Service (GSOFSS) systems. This document is applicable to coordination and interference calculations with Ka-band Geostationary Satellite Fixed Service systems.

YD/T 6505-2025 falls under ICS 33.060.30, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

JT/T 1458-2023 — Performance requirements and testing approaches of commercial vehicle communication system (V2X) terminal

JT/T 766.2-2019 — Shipborne terminal of BeiDou navigation satellite system - Part 2: Data exchange protocols

YD/T 6535-2025 — Test method for industry specific single-mode non-handheld terminals of TianTong-1 mobile communication satellite system

YD/T 6534-2025 — Technical requirement for industry specific single-mode non-handheld terminals of TianTong-1 mobile communication satellite system

YD/T 6506-2025 — The limits and calculation method of unwanted emission levels produced by a nongeostationary fixed-satellite service system in Ku/Ka/O/V band at radio astronomy sites

5 Classification and status

International classification (ICS): 33.060.30

Chinese Standard Classification (CCS): M 35

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 6505-2025

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 6505-2025

$255.00