YD/T 6499-2025Technical requirements of Internet of Things terminal for network quality monitoring (English PDF)
面向网络质量监控的物联网终端技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6499-2025 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 2, 2025
Implementation date
November 1, 2025
Scope
YD/T 6499-2025 is the English-translated version of 面向网络质量监控的物联网终端技术要求.
YD/T 6499-2025 is the Chinese standard "Technical requirements of Internet of Things terminal for network quality monitoring". This standard specifies the categories, formats, and other technical requirements for network quality parameters reported by IoT terminals.
This document applies to Narrowband IoT (NB-IoT) and enhanced machine-type communication (eMTC) IoT terminals, and is also applicable to other IoT terminal devices.
It was issued by Ministry of Industry and Information Technology. Issued on 2025-07-02, in force from 2025-11-01.
Found what you need?
Document preview — YD/T 6499-2025
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Term
- 3 Terms and Definitions
- 3.2 Abbreviations
- 3.3 Specifications
- 3.4 Product model and designation
- 3.5 Product marking
- 4 Product Classification
- 4.1 General
- 4.2 Model and name
- 4.3 Test Waveform
- 4.4 Product labelling
- 5 Requirements
- 5.2 Chemical components
- 5.3 SPD Disconnector Inspection
- 5.4 Environmental protection property
- 5.5 Material compatibility
- 5.6 Spurious emission
- 5.7 Transmit Spectrum Mask
- 5.8 Time of Rising Edge and Falling Edge
- 5.9 In-band Flatness
- 6 Test methods
- 6.2 Term restrictions
- 6.3 End-of-manufacturing inspection
- 6.4 Type inspection
- 6.5 Phone Program
- 6.6 OTASP/OTAPA Function
- 6.7 Processing of PIN
- 6.8 Fixed Dialing Number (FDN)
- 6.9 Abbreviated Dialing Number (ADN)
- 7 Inspection Rules
- 7.1 Packaging
- 7.2 Marking
- 7.3 Transport
- 7.4 Storage
- 7.5 Safety Test for Temporary Overvoltage Failure
- 7.6 Test of Temporary Overvoltage Withstand Characteristic
- 7.7 SPD Thermal Stability Test
- 8 Marking, Packing, Transport and Storage
- 8.1 Voltage Drop Test
- 8.2 Surge Withstand Capability at Load side
- 8.3 Short-circuit Withstand Capability at Load Side
- 9 Environmental Applicability Test
- 9.1 Vibration Test
- 9.2 High Temperature Test
- 9.3 Low Temperature Test
- 9.4 Alternating Humid Heat Test
- 9.5 Performance requirements for radio resource management
1 Foreword
YD/T 6499-2025 was issued by Ministry of Industry and Information Technology on 2 July 2025 and has been in force since 1 November 2025.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the categories, formats, and other technical requirements for network quality parameters reported by IoT terminals. This document applies to Narrowband IoT (NB-IoT) and enhanced machine-type communication (eMTC) IoT terminals, and is also applicable to other IoT terminal devices.
YD/T 6499-2025 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,667 other YD/T standards.
Of the 4,379 YD/T standards that do carry an ICS number, 3,421 (78%) fall under ICS 33, in the field of telecommunications.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
JB 2293-1978 — Wind tunnel test method of radiator of automobile and tractor
YD/T 4046-2022 — Cloud computing open application model
YD/T 4045-2022 — Big data - technical requirements and test methods for message middleware
YD/T 4044-2022 — Technical requirements for AI-based knowledge graph construction
5 Classification and status
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6499-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 6499-2025
$360.00