YD/T 6288-2024Transmission performance requirements and test methods for vehicle-mounted ultra-wideband and full-band voice communication equipment (English PDF)
车载超宽带和全频带语音通信设备传输性能要求和测试方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6288-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 10, 2024
Implementation date
April 1, 2025
Scope
YD/T 6288-2024 is the English-translated version of 车载超宽带和全频带语音通信设备传输性能要求和测试方法.
YD/T 6288-2024 is the Chinese standard "Transmission performance requirements and test methods for vehicle-mounted ultra-wideband and full-band voice communication equipment".
This standard specifies the performance requirements, test configuration, environmental conditions and test methods for vehicle-mounted ultra-wideband and full-band hands-free voice communication equipment, including the test of complete vehicle-mounted systems and vehicle-mounted ultra-wideband and full-band hands-free microphones.
This standard applies to original vehicle-mounted ultra-wideband and full-band hands-free systems and later installed vehicle-mounted ultra-wideband and full-band hands-free accessories.
Wired headphone-microphone sets and wireless headphone-microphone sets used in the car can refer to this standard. It was issued by Ministry of Industry and Information Technology. Issued on 2024-12-10, in force from 2025-04-01.
Found what you need?
Document preview — YD/T 6288-2024
National Standard of the People's Republic of China
- ICS
- 33.050
- Classification
- M37
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 6288-2024 was issued by Ministry of Industry and Information Technology on 10 December 2024 and has been in force since 1 April 2025.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the performance requirements, test configuration, environmental conditions and test methods for vehicle-mounted ultra-wideband and full-band hands-free voice communication equipment, including the test of complete vehicle-mounted systems and vehicle-mounted ultra-wideband and full-band hands-free microphones. This standard applies to original vehicle-mounted ultra-wideband and full-band hands-free systems and later installed vehicle-mounted ultra-wideband and full-band hands-free accessories. Wired headphone-microphone sets and wireless headphone-microphone sets used in the car can refer to this standard.
YD/T 6288-2024 falls under ICS 33.050, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 2576.1-2013 — Test method for user equipment of TD-LTE digital cellular mobile telecommunication network (Phase 1) - Part 1: Basic operation, services and reliability test
YD/T 2576.2-2013 — Test method for user equipment of TD-LTE digital cellular mobile telecommunication network (phase 1) - Part 2: Radio transmission and reception performance test
YD/T 2307-2011 — Technical requirement and testing methods for general function of mobile telecommunication terminal
YD/T 7386-2026 — 5G Digital Cellular Mobile Telecommunication Network Technical Requirement and Test Method of gNB Equipment for uRLLC (Phase 1)
YD/T 7130-2026 — Airborne communication - Technical requirements for cabin Wi-Fi subsystem
YD/T 2869.3-2025 — Performance requirement and measurement method for MIMO antenna terminal Part 3: 5G NR wireless terminal (mmWave)
5 Classification and status
International classification (ICS): 33.050
Chinese Standard Classification (CCS): M 37
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6288-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 6288-2024
$905.00