YD/T 6274-2024Technical requirements for two-dimensional intra-domain routing protocol based on IS-IS protocol (English PDF)
基于IS-IS协议的域内二维路由协议技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6274-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 10, 2024
Implementation date
April 1, 2025
Scope
YD/T 6274-2024 is the English-translated version of 基于IS-IS协议的域内二维路由协议技术要求.
YD/T 6274-2024 is the Chinese standard "Technical requirements for two-dimensional intra-domain routing protocol based on IS-IS protocol".
This standard specifies the technical requirements for the intra-domain two-dimensional routing protocol based on the Intermediate System to Intermediate System Routing Exchange Protocol (IS-IS), including the message format, the interaction process between intermediate systems, the two-dimensional routing policy configuration, the routing table structure and the routing calculation process.
This standard is applicable to the two-dimensional routing protocol based on the IS-IS protocol in the IPv6 scenario within the autonomous domain. It was issued by Ministry of Industry and Information Technology. Issued on 2024-12-10, in force from 2025-04-01.
Found what you need?
Document preview — YD/T 6274-2024
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Term
- 3 Terms and Definitions
- 3.2 Abbreviations
- 3.3 Specifications
- 3.4 Product model and designation
- 3.5 Product marking
- 4 Product Classification
- 4.1 General
- 4.2 Model and name
- 4.3 Test Waveform
- 4.4 Product labelling
- 5 Requirements
- 5.2 Chemical components
- 5.3 SPD Disconnector Inspection
- 5.4 Environmental protection property
- 5.5 Material compatibility
- 5.6 Spurious emission
- 5.7 Transmit Spectrum Mask
- 5.8 Time of Rising Edge and Falling Edge
- 5.9 In-band Flatness
- 6 Test methods
- 6.2 Term restrictions
- 6.3 End-of-manufacturing inspection
- 6.4 Type inspection
- 6.5 Phone Program
- 6.6 OTASP/OTAPA Function
- 6.7 Processing of PIN
- 6.8 Fixed Dialing Number (FDN)
- 6.9 Abbreviated Dialing Number (ADN)
- 7 Inspection Rules
- 7.1 Packaging
- 7.2 Marking
- 7.3 Transport
- 7.4 Storage
- 7.5 Safety Test for Temporary Overvoltage Failure
- 7.6 Test of Temporary Overvoltage Withstand Characteristic
- 7.7 SPD Thermal Stability Test
- 8 Marking, Packing, Transport and Storage
- 8.1 Voltage Drop Test
- 8.2 Surge Withstand Capability at Load side
- 8.3 Short-circuit Withstand Capability at Load Side
- 9 Environmental Applicability Test
- 9.1 Vibration Test
- 9.2 High Temperature Test
- 9.3 Low Temperature Test
- 9.4 Alternating Humid Heat Test
- 9.5 Performance requirements for radio resource management
1 Foreword
YD/T 6274-2024 was issued by Ministry of Industry and Information Technology on 10 December 2024 and has been in force since 1 April 2025.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the technical requirements for the intra-domain two-dimensional routing protocol based on the Intermediate System to Intermediate System Routing Exchange Protocol (IS-IS), including the message format, the interaction process between intermediate systems, the two-dimensional routing policy configuration, the routing table structure and the routing calculation process. This standard is applicable to the two-dimensional routing protocol based on the IS-IS protocol in the IPv6 scenario within the autonomous domain.
YD/T 6274-2024 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,667 other YD/T standards.
Of the 4,379 YD/T standards that do carry an ICS number, 3,421 (78%) fall under ICS 33, in the field of telecommunications.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
JB 2293-1978 — Wind tunnel test method of radiator of automobile and tractor
YD/T 4046-2022 — Cloud computing open application model
YD/T 4045-2022 — Big data - technical requirements and test methods for message middleware
YD/T 4044-2022 — Technical requirements for AI-based knowledge graph construction
5 Classification and status
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6274-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 6274-2024
$150.00