Valid

YD/T 6232-2024Data Center Power Utilization Effectiveness (PUE) Evaluation and Acceptance Specifications (English PDF)

数据中心电能利用效率(PUE)评估和验收规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 6232-2024 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

December 10, 2024

Implementation date

April 1, 2025

Scope

YD/T 6232-2024 is the English-translated version of 数据中心电能利用效率(PUE)评估和验收规范.

YD/T 6232-2024 is the Chinese standard "Data Center Power Utilization Effectiveness (PUE) Evaluation and Acceptance Specifications". This standard specifies the relevant requirements for the evaluation and acceptance of power efficiency in the planning, design, and operation stages of data centers.

This standard applies to newly built data centers, as well as the evaluation and acceptance of power utilization efficiency during the design and operation phase of single or modular units of data center buildings that use independent power distribution, air cooling, and electric air conditioning.

It is implemented by reference to the renovation and expansion of data centers. It was issued by Ministry of Industry and Information Technology. Issued on 2024-12-10, in force from 2025-04-01.

Found what you need?

Document preview — YD/T 6232-2024

National Standard of the People's Republic of China

ICS
33.040.40
Classification
M32

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 6232-2024 was issued by Ministry of Industry and Information Technology on 10 December 2024 and has been in force since 1 April 2025.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the relevant requirements for the evaluation and acceptance of power efficiency in the planning, design, and operation stages of data centers. This standard applies to newly built data centers, as well as the evaluation and acceptance of power utilization efficiency during the design and operation phase of single or modular units of data center buildings that use independent power distribution, air cooling, and electric air conditioning. It is implemented by reference to the renovation and expansion of data centers.

YD/T 6232-2024 falls under ICS 33.040.40, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

YD/T 2375-2019 — Technical requirements for high accuracy time synchronization

JT/T 1076-2016 — GNSS System for Operating Vehicles - Technical Specifications for Vehicle Video Terminal

YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC

YD/T 3118-2026 — Parameters and methods of test for website IPv6 support

YD/T 6230-2024 — Public Wireless LAN - Access authentication technical requirements based on third-party application platforms

YD/T 6231-2024 — Technical requirements for integrated management and control of intelligent operation and maintenance of data centers

5 Classification and status

International classification (ICS): 33.040.40

Chinese Standard Classification (CCS): M 32

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 6232-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 6232-2024

$135.00