YD/T 6200-2024Hydrogen fuel cell power supply system for communications (English PDF)
通信用氢燃料电池供电系统
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6200-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
December 10, 2024
Implementation date
April 1, 2025
Scope
YD/T 6200-2024 is the English-translated version of 通信用氢燃料电池供电系统.
YD/T 6200-2024 is the Chinese standard "Hydrogen fuel cell power supply system for communications".
This standard specifies the terminology, system composition, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage and operation and maintenance requirements of hydrogen fuel cell power supply systems for communications.
This standard applies to hydrogen fuel cell power supply systems with a nominal output voltage of DC-48V, using hydrogen and air as reaction gases. The source of hydrogen can be hydrogen cylinders, solid hydrogen, water electrolysis, methanol reforming, and natural gas.
It was issued by Ministry of Industry and Information Technology. Issued on 2024-12-10, in force from 2025-04-01.
Found what you need?
Document preview — YD/T 6200-2024
National Standard of the People's Republic of China
- ICS
- 27.070
- Classification
- M41
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Requirements
1 Foreword
YD/T 6200-2024 was issued by Ministry of Industry and Information Technology on 10 December 2024 and has been in force since 1 April 2025.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the terminology, system composition, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage and operation and maintenance requirements of hydrogen fuel cell power supply systems for communications. This standard applies to hydrogen fuel cell power supply systems with a nominal output voltage of DC-48V, using hydrogen and air as reaction gases. The source of hydrogen can be hydrogen cylinders, solid hydrogen, water electrolysis, methanol reforming, and natural gas.
YD/T 6200-2024 falls under ICS 27.070, in the field of energy and heat transfer engineering.
This catalogue holds 5 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 1092-2023 — Telecommunication cables - Foamed polyolefin dielectric, corrugated copper-tube outer conductor, 50 Ohm radio-frequency coaxial cable for wireless communications
YD/T 2165-2010 — Technical specification of modular uninterruptible power systems for telecommunications
YD/T 777-2006 — Inversion equipment for telecommunications
YD/T 1537-2026 — Outdoor cabinets for information and telecommunications system
YD/T 1363.5-2026 — Specification of supervision system for power, air conditioner and environment - Part 5: Access control and control supervision system
YD/T 6198-2024 — Aluminum-air battery system for communications
5 Classification and status
International classification (ICS): 27.070
Chinese Standard Classification (CCS): M 41
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6200-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 6200-2024
$390.00