YD/T 6100-2024Technical requirements for the Bidirectional Forwarding Detection (BFD) mechanism based on multipoint networks (English PDF)
基于多点网络的双向转发检测(BFD)机制的技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 6100-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
October 24, 2024
Implementation date
February 1, 2025
Scope
YD/T 6100-2024 is the English-translated version of 基于多点网络的双向转发检测(BFD)机制的技术要求.
YD/T 6100-2024 is the Chinese standard "Technical requirements for the Bidirectional Forwarding Detection (BFD) mechanism based on multipoint networks".
This standard specifies the technical requirements for a bidirectional forwarding detection mechanism based on a multipoint network, including the bidirectional forwarding detection (BFD) control message format, session model, state variables, state machine, sending and receiving of BFD control messages, and tail node extension functions based on a multipoint network.
This standard applies to network devices that support the bidirectional forwarding detection mechanism of a multipoint network. It was issued by Ministry of Industry and Information Technology. Issued on 2024-10-24, in force from 2025-02-01.
Found what you need?
Document preview — YD/T 6100-2024
National Standard of the People's Republic of China
- ICS
- 33.040.40
- Classification
- L78
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 6100-2024 was issued by Ministry of Industry and Information Technology on 24 October 2024 and has been in force since 1 February 2025.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the technical requirements for a bidirectional forwarding detection mechanism based on a multipoint network, including the bidirectional forwarding detection (BFD) control message format, session model, state variables, state machine, sending and receiving of BFD control messages, and tail node extension functions based on a multipoint network. This standard applies to network devices that support the bidirectional forwarding detection mechanism of a multipoint network.
YD/T 6100-2024 falls under ICS 33.040.40, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
CJ/T 188-2018 — Technical requirements of utility meters data transmission
YDC 079-2009 — Technical Specifications and Testing Methods of Wireless LAN for Mobile Terminals
YD/T 5080-2026 — Technical Specifications for Network Management System of Optical Cable Transmission Engineering
YD/T 4839.3-2026 — Technical requirements for collaborative management and control of IP network and optical network - Part 3: Interface information model between coordination layer and single domain management control system
YD/T 6101-2024 — Technical requirements for intelligent management of deep packet inspection policy information base
5 Classification and status
International classification (ICS): 33.040.40
Chinese Standard Classification (CCS): L 78
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 6100-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 6100-2024
$315.00