Valid

YD/T 6068-2024Overall architecture and technical requirements of IP bearer network for aggregation layer edge cloud (English PDF)

面向汇聚层边缘云的IP承载网络总体架构和技术要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 6068-2024 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

October 24, 2024

Implementation date

February 1, 2025

Scope

YD/T 6068-2024 is the English-translated version of 面向汇聚层边缘云的IP承载网络总体架构和技术要求.

YD/T 6068-2024 is the Chinese standard "Overall architecture and technical requirements of IP bearer network for aggregation layer edge cloud".

This standard specifies the overall architecture and technical requirements of IP bearer network for convergence layer edge cloud, including IP bearer networking requirements, network reference system and technical characteristics, interface, QOS guarantee, security, operation support, evolution and other technical requirements for convergence layer edge cloud.

This standard is applicable to the planning and construction of IP bearer network for convergence layer edge cloud, as well as the research, development and technology introduction of related network equipment.

It was issued by Ministry of Industry and Information Technology. Issued on 2024-10-24, in force from 2025-02-01.

Found what you need?

Document preview — YD/T 6068-2024

National Standard of the People's Republic of China

ICS
33.040.30
Classification
M32

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Abbreviations
  • 3.1 Terms and definitions
  • 4 General
  • 4.1 Test environment
  • 4.2 UE Information
  • 4.3 Test Implementation
  • 5 Technical requirements

1 Foreword

YD/T 6068-2024 was issued by Ministry of Industry and Information Technology on 24 October 2024 and has been in force since 1 February 2025.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard specifies the overall architecture and technical requirements of IP bearer network for convergence layer edge cloud, including IP bearer networking requirements, network reference system and technical characteristics, interface, QOS guarantee, security, operation support, evolution and other technical requirements for convergence layer edge cloud. This standard is applicable to the planning and construction of IP bearer network for convergence layer edge cloud, as well as the research, development and technology introduction of related network equipment.

YD/T 6068-2024 falls under ICS 33.040.30, in the field of telecommunications.

This catalogue holds 3,420 other YD/T standards in that field.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

4 Related standards

Standards on related subjects:

YD/T 2375-2019 — Technical requirements for high accuracy time synchronization

JT/T 1076-2016 — GNSS System for Operating Vehicles - Technical Specifications for Vehicle Video Terminal

YD/T 2554.1-2013 — Plastic optical fiber connector - Part 1: Type LC

YD/T 3118-2026 — Parameters and methods of test for website IPv6 support

YD/T 6069.1-2024 — Technical requirements for open converged network equipment for network edge nodes - Part 1: General architecture

YD/T 6070-2024 — Technical requirements for live streaming systems based on the Quick UDP Internet Connection (QUIC) protocol

5 Classification and status

International classification (ICS): 33.040.30

Chinese Standard Classification (CCS): M 32

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 6068-2024

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 6068-2024

$330.00