YD/T 5140-2005Acceptance Specifications for Equipment Installation Project of wired Access Network (English PDF)
有线接入网设备安装工程验收规范
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for YD/T 5140-2005 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
February 28, 2006
Implementation date
June 1, 2006
Scope
YD/T 5140-2005 is the English-translated version of 有线接入网设备安装工程验收规范.
YD/T 5140-2005 is the Chinese standard "Acceptance Specifications for Equipment Installation Project of wired Access Network". This standard applies to new construction wired access network equipment installation work with the inspection, initial inspection, commissioning and final inspection (final acceptance).
Expansion, renovation works to be implemented by reference. Issued on 2006-02-28, in force from 2006-06-01.
Found what you need?
Document preview — YD/T 5140-2005
National Standard of the People's Republic of China
- Classification
- P92
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 2.1 Term
- 3 Terms and Definitions
- 3.2 Abbreviations
- 3.3 Specifications
- 3.4 Product model and designation
- 3.5 Product marking
- 4 Product Classification
- 4.1 General
- 4.2 Model and name
- 4.3 Test Waveform
- 4.4 Product labelling
- 5 Requirements
- 5.2 Chemical components
- 5.3 SPD Disconnector Inspection
- 5.4 Environmental protection property
- 5.5 Material compatibility
- 5.6 Spurious emission
- 5.7 Transmit Spectrum Mask
- 5.8 Time of Rising Edge and Falling Edge
- 5.9 In-band Flatness
- 6 Test methods
- 6.2 Term restrictions
- 6.3 End-of-manufacturing inspection
- 6.4 Type inspection
- 6.5 Phone Program
- 6.6 OTASP/OTAPA Function
- 6.7 Processing of PIN
- 6.8 Fixed Dialing Number (FDN)
- 6.9 Abbreviated Dialing Number (ADN)
- 7 Inspection Rules
- 7.1 Packaging
- 7.2 Marking
- 7.3 Transport
- 7.4 Storage
- 7.5 Safety Test for Temporary Overvoltage Failure
- 7.6 Test of Temporary Overvoltage Withstand Characteristic
- 7.7 SPD Thermal Stability Test
- 8 Marking, Packing, Transport and Storage
- 8.1 Voltage Drop Test
- 8.2 Surge Withstand Capability at Load side
- 8.3 Short-circuit Withstand Capability at Load Side
- 9 Environmental Applicability Test
- 9.1 Vibration Test
- 9.2 High Temperature Test
- 9.3 Low Temperature Test
- 9.4 Alternating Humid Heat Test
- 9.5 Performance requirements for radio resource management
1 Foreword
YD/T 5140-2005 was issued by Ministry of Industry and Information Technology on 28 February 2006 and has been in force since 1 June 2006.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 16 pages in English translation.
2 Scope Preview
This standard applies to new construction wired access network equipment installation work with the inspection, initial inspection, commissioning and final inspection (final acceptance). Expansion, renovation works to be implemented by reference.
YD/T 5140-2005 is filed under Chinese Standard Classification P92, in the field of engineering construction.
This catalogue holds 2,288 other YD/T standards without an ICS number.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 16 pages (approximate)
Chinese original: about 24,231 characters
4 Related standards
Standards on related subjects:
GB 50168-2018 — Standard for construction and acceptance of cable line electric equipment installation engineering
GB 50093-2013 — Code for construction and quality acceptance of automation instrumentation engineering
YD/T 5141-2021 — Code for Acceptance of Digital Microwave Relay Communication System Engineering
YD/T 5235-2019 — Technical Specifications for Data Center Infrastructure Engineering
YD/T 5139-2019 — Design Specifications for Equipment Installation of Cable Access Network Engineering
5 Classification and status
Chinese Standard Classification (CCS): P 92
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
How to Download YD/T 5140-2005
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 5140-2005
$470.00