Valid

YD/T 5118-2005Specifications of Engineering Design for ATM Network (English PDF)

ATM工程设计规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for YD/T 5118-2005 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

October 8, 2005

Implementation date

January 1, 2006

Scope

YD/T 5118-2005 is the English-translated version of ATM工程设计规范.

YD/T 5118-2005 is the Chinese standard "Specifications of Engineering Design for ATM Network". This standard applies to new construction ATM network design. Expansion project in the rational use of the existing facilities on the basis of reference to the specification. Issued on 2005-10-08, in force from 2006-01-01.

Found what you need?

Document preview — YD/T 5118-2005

National Standard of the People's Republic of China

Classification
P76

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative References
  • 2.1 Term
  • 3 Terms and Definitions
  • 3.2 Abbreviations
  • 3.3 Specifications
  • 3.4 Product model and designation
  • 3.5 Product marking
  • 4 Product Classification
  • 4.1 General
  • 4.2 Model and name
  • 4.3 Test Waveform
  • 4.4 Product labelling
  • 5 Requirements
  • 5.2 Chemical components
  • 5.3 SPD Disconnector Inspection
  • 5.4 Environmental protection property
  • 5.5 Material compatibility
  • 5.6 Spurious emission
  • 5.7 Transmit Spectrum Mask
  • 5.8 Time of Rising Edge and Falling Edge
  • 5.9 In-band Flatness
  • 6 Test methods
  • 6.2 Term restrictions
  • 6.3 End-of-manufacturing inspection
  • 6.4 Type inspection
  • 6.5 Phone Program
  • 6.6 OTASP/OTAPA Function
  • 6.7 Processing of PIN
  • 6.8 Fixed Dialing Number (FDN)
  • 6.9 Abbreviated Dialing Number (ADN)
  • 7 Inspection Rules
  • 7.1 Packaging
  • 7.2 Marking
  • 7.3 Transport
  • 7.4 Storage
  • 7.5 Safety Test for Temporary Overvoltage Failure
  • 7.6 Test of Temporary Overvoltage Withstand Characteristic
  • 7.7 SPD Thermal Stability Test
  • 8 Marking, Packing, Transport and Storage
  • 8.1 Voltage Drop Test
  • 8.2 Surge Withstand Capability at Load side
  • 8.3 Short-circuit Withstand Capability at Load Side
  • 9 Environmental Applicability Test
  • 9.1 Vibration Test
  • 9.2 High Temperature Test
  • 9.3 Low Temperature Test
  • 9.4 Alternating Humid Heat Test
  • 9.5 Performance requirements for radio resource management

1 Foreword

YD/T 5118-2005 was issued by Ministry of Industry and Information Technology on 8 October 2005.

The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

This standard applies to new construction ATM network design. Expansion project in the rational use of the existing facilities on the basis of reference to the specification.

YD/T 5118-2005 is filed under Chinese Standard Classification P76, in the field of engineering construction.

This catalogue holds 2,288 other YD/T standards without an ICS number.

In this catalogue, YD/T standards carry edition years from 1982 to 2026.

3 About this standard

Sector: Telecommunication Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 15 pages (approximate)

Chinese original: about 22,291 characters

4 Related standards

Standards on related subjects:

GB 30485-2013 — Standard for pollution control on co-processing of solid wastes in cement kiln

GB 50949-2013 — Construction code for sound reinforcement system

GB 50313-2013 — Code for design of fire communication and command system

YD/T 5123-2021 — Specification for construction supervision of communication line engineering

YD/T 5113-2018 — Design Specifications for Network Management System of WDM Optical Fiber Transmission System Engineering

5 Classification and status

Chinese Standard Classification (CCS): P 76

Prefix YD/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download YD/T 5118-2005

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

YD/T 5118-2005

$465.00