YD/T 4865-2024Communication cable fluoroplastic foam insulation RF coaxial cable longitudinal braided outer conductor type (English PDF)
通信电缆 氟塑料发泡绝缘射频同轴电缆 纵包编织外导体型
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4865-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 5, 2024
Implementation date
October 1, 2024
Scope
YD/T 4865-2024 is the English-translated version of 通信电缆 氟塑料发泡绝缘射频同轴电缆 纵包编织外导体型.
YD/T 4865-2024 is the Chinese standard "Communication cable fluoroplastic foam insulation RF coaxial cable longitudinal braided outer conductor type".
This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of fluoroplastic foam insulated RF coaxial cables with longitudinal braided outer conductors.
This standard applies to the design, manufacture and inspection of fluoroplastic foam insulated longitudinal braided outer conductor RF coaxial cables used for signal transmission in indoor occasions, with an operating frequency of 50 MHz~6000 MHz.
It was issued by Ministry of Industry and Information Technology. Issued on 2024-07-05, in force from 2024-10-01.
Found what you need?
Document preview — YD/T 4865-2024
National Standard of the People's Republic of China
- ICS
- 33.120.10
- Classification
- M42
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4865-2024 was issued by Ministry of Industry and Information Technology on 5 July 2024 and has been in force since 1 October 2024.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the product classification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of fluoroplastic foam insulated RF coaxial cables with longitudinal braided outer conductors. This standard applies to the design, manufacture and inspection of fluoroplastic foam insulated longitudinal braided outer conductor RF coaxial cables used for signal transmission in indoor occasions, with an operating frequency of 50 MHz~6000 MHz.
YD/T 4865-2024 falls under ICS 33.120.10, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 1092-2023 — Telecommunication cables - Foamed polyolefin dielectric, corrugated copper-tube outer conductor, 50 Ohm radio-frequency coaxial cable for wireless communications
YD/T 2165-2010 — Technical specification of modular uninterruptible power systems for telecommunications
YD/T 841-1996 — Underground communication pipe with plastic pipe
YD/T 2019.7-2026 — Test method for broadband customer networking based on public telecommunication network - Part 7: Fiber-To-The-Room (FTTR) business equipment
YD/T 2019.6-2026 — Test method for broadband customer networking based on public telecommunication network - Part 6: Fiber-To-The-Room (FTTR) residential equipment
YD/T 4875-2024 — Wearable device safety and reliability technical specifications Wrist-worn devices
5 Classification and status
International classification (ICS): 33.120.10
Chinese Standard Classification (CCS): M 42
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4865-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4865-2024
$270.00