YD/T 4853-2024Technical requirements for access network slicing equipment (English PDF)
接入网切片设备技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for YD/T 4853-2024 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
July 5, 2024
Implementation date
October 1, 2024
Scope
YD/T 4853-2024 is the English-translated version of 接入网切片设备技术要求.
YD/T 4853-2024 is the Chinese standard "Technical requirements for access network slicing equipment".
This standard specifies the Ethernet function, virtual local area network (VLAN) function, quality of service (QoS), multicast service and slice management requirements of optical line terminal (OLT) equipment and optical network unit (ONU) equipment that support resource slicing and service slicing.
This standard is applicable to the development and production of access network central office equipment and user-side equipment that support slicing functions in public telecommunications network environments, and can also be used as a reference for dedicated telecommunications networks.
It was issued by Ministry of Industry and Information Technology. Issued on 2024-07-05, in force from 2024-10-01.
Found what you need?
Document preview — YD/T 4853-2024
National Standard of the People's Republic of China
- ICS
- 33.040.50
- Classification
- M42
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Abbreviations
- 3.1 Terms and definitions
- 4 General
- 4.1 Test environment
- 4.2 UE Information
- 4.3 Test Implementation
- 5 Technical requirements
1 Foreword
YD/T 4853-2024 was issued by Ministry of Industry and Information Technology on 5 July 2024 and has been in force since 1 October 2024.
The YD/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard specifies the Ethernet function, virtual local area network (VLAN) function, quality of service (QoS), multicast service and slice management requirements of optical line terminal (OLT) equipment and optical network unit (ONU) equipment that support resource slicing and service slicing. This standard is applicable to the development and production of access network central office equipment and user-side equipment that support slicing functions in public telecommunications network environments, and can also be used as a reference for dedicated telecommunications networks.
YD/T 4853-2024 falls under ICS 33.040.50, in the field of telecommunications.
This catalogue holds 3,420 other YD/T standards in that field.
In this catalogue, YD/T standards carry edition years from 1982 to 2026.
3 About this standard
Sector: Telecommunication Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
4 Related standards
Standards on related subjects:
YD/T 1092-2023 — Telecommunication cables - Foamed polyolefin dielectric, corrugated copper-tube outer conductor, 50 Ohm radio-frequency coaxial cable for wireless communications
YD/T 2165-2010 — Technical specification of modular uninterruptible power systems for telecommunications
YD/T 841-1996 — Underground communication pipe with plastic pipe
YD/T 4852-2024 — SDN-based broadband access network testing method Controller southbound interface based on PON device YANG model
YD/T 4851-2024 — YANG model for broadband access network slicing based on SDN
YD/T 4850-2024 — Broadband access network controller based on SDN
5 Classification and status
International classification (ICS): 33.040.50
Chinese Standard Classification (CCS): M 42
Prefix YD/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download YD/T 4853-2024
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
YD/T 1114-2026 — Halogen-free flame retardant optical fibre cable
YD/T 1181.1-2026 — Characteristics of non-metal reinforcement used for optical fiber cables - Part 1: Glass fiber reinforced plastic rods
YD/T 1181.3-2026 — Characteristics of non-metal reinforcement for optical fiber cables - Part 3: aramid fiber reinforced plastic rods
YD/T 4853-2024
$195.00